开云体育

Yes, I recently installed them on my G11G, but only so the mount would “know” it’s position after a push-to. They work just fine for that, but don’t in any way interact with the standard

Are there any Metaguide enthusiasts among us?? I briefly confirmed that it works with my GM811G, but I have no feel for how it compares to PHD2 (I did only a brief test).? I have already confirmed

I'm connecting the Gemini-2 ethernet port to the LAN port on one of my Google WiFi mesh units:

What do you mean by adapter? [email protected]> wrote: -- Brian Brian Valente astro portfolio https://www.brianvalentephotography.com/astrophotography/ portfolio brianvalentephotography.com

Hi Brian, I followed the video, but no luck. ?I did check that that wireless adapter works to connect other devices in my house to my home network?(e.g., TV)?and I'm using the exact same adapter

Hi Bret just typing in the IP address isn't going to work. your Gemini isn't getting its ip address from your router, so something isn't connecting correctly Make sure your router is fully powered on

Hi Folks, I'm trying connect to Gemini via ethernet to see if that resolves my issue. ?I have Gemini connected though a WiFI adapter to my local home network, but I'm not able to connect to Gemini.

Hi Mengan, These encoders are for use with a digital setting circles computer. They cannot be used for guiding. If you have a guiding issue please post what you are using and what the problem looks

discover that TVC only works when the Speed is set to "Guide". Yes, that's correct Sorry i re-read the op which I thought was guide mode, but i missed the center part. TVC only affects guide speed --

Brian, I once tried adjusting the TVC value for this very issue, only to discover that TVC only works when the Speed is set to "Guide". Can you confirm TV works when speed is set to "Center"? -Bill

I would also suggest replacing the coin cell in the Gemini-2.? If somebody told me their Gemini-2 would partly boot up and then get hung, that's what I'd think the problem is.? It's possible your

Jeff crossing Ra/DEC cables is an oldie but a goodie that everyone does, me, more than once. As for connecting to a computer.... please read Gemini FAQs ( https://gemini-2.com/index.html ).? Start at

Mengnan - I believe those encoders are used with DSC devices for visual push to capabilities. I don't believe those are accurate enough to assist in ap guiding. There exist more accurate ones, but

At this point I would have no idea how to run my mount with my PC. I have crossed my Dec and RA but didn’t have any issues except for some confusion when up/down turned into left/right.

Maybe if I left off the inexpensive part and just put “money is no object” instead? It’s all okay. We generally get what we pay for.

Thanks Michael! I appreciate your input.

Have anyone tried the encoder kit? https://www.astrodevices.com/shop/index.php?product/page/16/Losmandy+GM8%2FGM11+Encoder+Kit I recently bought a G11G. I wonder if the encoder kit will improve the

Hopefully you have good hand eye coordination? As mechanical things go a G11 is pretty damn simple. We aren't workin' with watches here. Three years isn't a long time in the life of a G11, OTOH, 30

Hi Michael button, the star moves instantly, but when I press the north or south button, there is about a 1.5-second delay before any movement. That sounds like backlash. If you want to reduce that

Hi jeff depends upon which vet Gemini 2 you have, I suspect G2 mini. ?So one port , the Au ?th o guider is 6 pin the other Port F is 8 pin Yes it’s possible to fit a 6 pin plug in an 8 pin socket.