开云体育

After resetting the config files (.PHDGuidingV2 and .phd2) last night I didn't see any spikes or issues with the centroid.?I think that something in the old config files was confusing it. I have seen

that's right in the sweet spot where multi-star should show improvements. Maybe you can try experimenting with that again. Multi-star improves things by reducing the noise around centroid calculation,

Glad to contribute. I'm using a hyperstar on an edgehd8. Guiding is with a 60mm / 242mm focal length Astromania guide scope + ASI 178MC camera. I measured the focal length with a plate solve, so it

Jamie thanks for reporting back. what focal length are you at, and is it an OAG or separate guider? jamie.amendolagine@...> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com

So far from last night I'm not seeing any earth shattering improvements. It's hard to tell if I am getting better RMS results as they often vary by at least 10-15%. The first part of the night I saw

Anyone using the ASIAIR to control a G11 Gemini II? ? I have ASI cameras and it looks like a nice system to manage my equipment. ? Any known issues with goto? ?Any issues using SkySafari? ? Any

Hi Jamie I beta tested it for about four months In general, it's incredibly easy. just go to advanced settings->guiding and check the 'use multiple stars' checkbox some thoughts: - it uses only

I'm going to try it out tonight! I won't have too much time, so I'll probably need a few nights to have a solid understanding, but hopefully this will help! Anyone else tried this yet? Jamie

Hi Luis, I'm not sure I understand, but maybe if I run through how I do remote operation it can help. If not, just pull the handle and flush it. LOL! I have a powered hub mounted on my Telescope.

First Congratulations! From what I've seen, I highly doubt you'd have anything to worry about. Everything from Losmandy is far more precision than other manufacturers are. You could email the Serial

Thanks I’ll check it out.

If the worm is brass color (so it is brass) and it is non-magnetic, it should be the precision brass worm. But of course, all worms slightly vary... Best, Michael [email protected]> wrote: --

The high precision worm is brass, "low" precision is steel.? If the mount is only three years old its most certainly high precision. Keith

Folks, I bought a 3 year old G11 Gemini II. ? Can I tell if it has the precision worm? -- Tim Kimbler

I downloaded NINA and having never used it before i took a stab at just "going for it" a couple hiccups in my settings but up and imaging within about 15 minutes. if you know one imaging program, you

Hi Bill glad you found that info - yes Gemini does much better at 15-18v you can use a voltage up-converter for that (i use a 15v version of this, but this 16.3v looks really good)

So I think I’ve figured out the problem. It turns out that neither of my 12 V batteries were up to the task of driving the scope in the cold weather. They are both somewhat old so maybe it is time

New GM811g w/Gemini-2 Hand Controller, sometimes Skysafari Pro RAEXT is installed, I guess that makes a difference. Thanks Brian, The flip worked fine tonight after following your instructions.

Meridian's are only a line in the sky now. I put the RAEXT on my GM811GHD, and I'm having a blast ignoring the Meridian's. -- SonnyE Sonny's Youtube Channel (

Hi Bill, I get "Motor Lags" from time to time...you can look for imbalance in the scope load. The lags messages are a minor concern...the mount will still work ok. However, "Motor Stalled" means a