开云体育

O.M.G. PEC spikes!!! I'd never ever guess that one! So many Sci Fi movies have the same theme: glitches in the machine code. From Westworld to.... you name it. I was also thinking of the great movie

Hi! Michael :) Thanks. I was only thinking mechanics. But there are other things. And what might cause problems when you're not thinking of it? PEC Turns out, I had PEC turned on. But it should be

Hi James, Welcome to the group! There are a lot of guys here from around the world that are well versed in Losmandy Mounts going way back. So you came to the right place. -- SonnyE Sonny's Youtube

Hi! This clearly affects my imaging. The spikes produce doubled stars, so to speak. Subs not usable. So it needs to be fixed. I totally agree on the slightly wiggly-jiggly graphs :) But this one

How is your imaging? Just because you are getting some jags does not mean you have a problem. If it shows in your imaging and is insurmountable in processing, that's a problem. But in my experiences,

Hi Chip, Definitely a very brassy color. One thing I noticed is I have to turn the clutch knobs with excessive force to get the scope to have a stiff resistance to moving. Daniel said there might be

I can't speak to the older, or first generation Gemini II units, mine is very newish, February this year. But... have you tried a Factory Reset? Then enter your own Lon-Lat, time, and date, and

Hi James, I'm one one the rarities in this group: I only have Gemini1 units so far. Many of them.... So I cannot say explicitly that your Gemini-2 is exactly the same as what I wrote. You will have

Thank you Brendan, When I had the mount connected to the web interface, the voltage was good. last night I was not able to connect through the ethernet (blaming on the new windows update), so my only

Hi James - Brendan made some good suggestions for you 99% of the time this kind of issue is from incorrect Gemini settings for date/time/location/timezone. So first is to make sure the info you are

Thank you Michael, You mentioned the issues with Gemini 1. I have the Gemini 2 but with the first version of the control board. Will the above advice work for my version as well, and the attached

I’m glad to see they’re still available. That’s got to be a tough business, making a product that, once it’s successfully installed, has a life of a quarter century, with a limited pool of

I bet this would be a NASA APOD if you would submit it.

Hi Magnus, Given all that you have done, I doubt it is the mount drive.... but other ideas follow.... The camera optics are very sensitive to any mechanical looseness. When I've gotten glitches in

Hi James, Things to try... consider them beginners notes.... 1. Any time you change the date or time or latitude, longitude, etc: *after you enter the new values you must power off the Gemini,

James what does the Web interface state the battery voltage is ( https://gemini-2.com/web/web-battery-ports.php ) ? Are you sure your battery top "finger clip" is contacting the battery top with

Hi! I seem to have run into a problem where I think I'd need some smart input. I've cleaned and relubed my G11, put everything together and adjusted the RA worm as usual. Now I am also running a

Hi everyone, my name is James and I have been into AP for a few years now. I started with an Ioptron IEQ 45 and I was able to get that thing to work pretty good for a non American made mount. I

Hi, I purchased a used G11 with the older Gemini 2 Go To. The mount worked great for the first few weeks, then it started going nutty. Pointing in strange places I did not tell it to go. I looked up

This is what I'm saying... Tom