开云体育

Looks good to me Bill. I have some of these sheds for storing stuff. Mine are separating at the corners. Trying to figure out how to re-secure them. But like your ingenuity.

OK, Ethernet hooks up then later will not.? HC firmware updated to 2017, and no further.? Think I will just go USB for now.? Obviously Ethernet connection is not reliable.? Gemini II site states

Thanks Michael, I bet I would be interested in longer cables. But not until I actually do have a mount, and have had the time to experiment with how I would choose to route them. As for Identifiers,

Thanks Chuck:? I got hooked up earlier today.? Then I ran Gemini updater program.? That was a disaster.? It proceeded correctly, but when flash should have started, got bunch of error messages.?

Nice Derek, that you don't have to move. Nice place their in the Bay Area. Easy to get to dark sites.and not far from michael, if you need something or other.The Losmandy HD tripod is a beast. But I

Gary I had the same experience because Microsoft? 10 has tried to prevent intrusions into the OS.?? So I found two ways around Microsoft.? First,? manually add the IP address of the mount via

Thanks Tim:? I have 4 Win 10 computers.? None of them will auto detect Gemini II.? Net Bios is on.? Auto detect on, DHCP etc. Have tried multiple scenarios, numbers inserted IP, Gateway etc.

I already had this mount from my 12" LX200.. I left it out so long that the legs are no longer adjustable for length due to rust, and even though the legs are frozen at different lengths, it sits

ah i understand now. that makes more sense wrote:

Scroll thru this (not mine) that shows this clearly.. http://www.astroromp.com/astronomy/my_new_setup.htm Derek _____ Sent: Friday, January 31, 2020 8:05 PM To:

You're not following correctly.. G11 on an MA Adapter that is mounted to a Meade Giant Field Tripod.. There is a "spreader" and up thru the center goes a big T Handle Bolt thru the MA Adapter to a big

The other thread about how we each initially setup our portable setups was interesting to me.? I was preparing a response when I realized that I put in a permanent pier, and haven't used my field

if i'm following this correctly, your non-losmandy legs have only a center bolt and you've had to figure out workarounds for getting it to not rotate on top of the tripod? Boy that sounds like a

Good conversation. The stock motor cables are not very long... the RA cable is the shortest. These can become snagged on various knobs or other wires as you slew around so one must be careful. And

Well then.. I did it that way, because no matter how tight I tightened the center bolt (when I first got the mount), once I added the 38 pound G11 and 30 pounds or so of equipment, the T handle

Let’s see if I can shed some light on the networking… I wish I could respond simply by say “oh, just do _____ and it will work”. But the answer isn’t so easy. I’m going to try to reduce

You are are right that is how the tripod arrived. I moved the mount base around to the side putting a leg pointing north. I have not had any issues with the RA plenty of room for both.. Sent from

Derek, To me, discussion are flows of thought. As long as the water keeps flowing, why dam it up? Never had a Meade myself. But I've been to Lake Mead (

Thanks Stu! I still have the EX12 on my list. Even if it comes deaf. (No Ears) *Do it ONCE. Do it Right!* I done been taught, To swear off the others. I wasted my cash, On some other trash. I won't

Correction....the mounting holes are there so you can move the mounting "ears" up... Stu