开云体育

Hi! Thanks a lot! Yes, I'd be very happy to buy a bunch (3 might be enough :)) belville washers from you, and see what difference that makes!! Can you email me off the list? magnus @ vista . se. I've

Used not sure how old......

"Recently Purchased a used G11 with G1 controller" i'm guessing it's not under warranty B

aha! I'd like to look at your PE for clues. Please send me the unguided PHD2 logfile, with info on your Scope FL aperture, and Autoguide camera pixel size X and Y, and any Barlow info (same data

Forgot to mention I ran 3 worm cycles unguided thru Pecprep and bearings seem ok according to the tool

Swapped RA Gearbox to Dec,,,,,only change I see is the periodicity of RA looks more like a saw tooth, Still have RA RMS at 1.6 Also removed all end play on RA and slacked up the worm to have a little

Hi Magnus, When you moved to another object, or did a meridian flip, the problem went away or got better. So I consider 2 possible causes. One is the DEC of the mount, and the second is the guide

Hi! Yes, I'm interested in working on the mount, finding causes that I can eliminate. I already do as you say, run latest PHD2 and use GA etc. The major problem here, is that it is intermittent...

That's definitely a possibility too My experience is pretty much all Losmandy mounts have a certain amount of DEC backlash so my thought is it's easier to first make sure the guiding is set up

Hello Everyone, Thank you very much for adding me to the group. I am an owner of a brand new Losmandy G11 GT mount with Gemini 2 hand controller, and am looking to connect the mount to my laptop

I’m not sure that agree that it’s a PHD problem. He’s talking about severe DEC backlash. This sounds like a mount issue. Rob Get Outlook for iOS<https://aka.ms/o0ukef>

HI Magnus you should probably post this to the PHD group since it sounds like a guiding issue couple thoughts: 1. make sure you are on the latest phd2 if you aren't already doing that, not the

Hi! Lately, I'm experiencing bad guiding in DEC on mu G11. It's OK in RA and at times also in DEC, but unpredictable (so far). Good means a RMA of about 0.7 arc secs. Bad means RMS over 1.5. I use

Thanks, Dave . . . good point! Michael, you may have hit on the problem. Since the drives work fine in Sidereal mode, and since the Gemini looks fine until the mount needs to actually move, the

Hi Greg, Some actions to try: I think you said your RA has the high precision Ovision worm system. So Chip's comment about the brass Losmandy worm does not apply to that. I don't have an Ovision worm

Hi Greg, A couple of thoughts on your process. You are not likely to get very low tracking error numbers with the stainless steel worms, you must have brass worms for the best precision and tracking.

Forgot to mention G11 is pier mounted

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Losmandy_users group. File : /g11 3 worm cycles B.JPG Uploaded by : gvblk4msn

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Losmandy_users group. File : /guding 11 22 17.JPG Uploaded by : gvblk4msn

Recently Purchased a used G11 with G1 controller I gave up on using the RS232 interface....it will connect at times others it will not,. Tried 2 different Apdapters USB to 9 pin, Cable is sound, At