开云体育

Hi everyone, I am in the process of purchasing a used G-11 with Losmandy digital setting circles and polar alignment scope from a fellow club member. After years of using fork mounts, I'm still

shortening its acid batteries. automatic etc.. all types, Thanks to all of you who responed. The battery is a lead-acid battery sold by Pep Boys for boosting your car battery when needed. The

this does no good to lead acid batteries, all you are doing is shortening its life. Its definitely good for nicads but does not apply to lead acid batteries. All you have to do is to promptly

I doubt it, most likely your battery pack is not in good shape. What kind of batteries and how big is the pack made off? I sometimes use a 5ah lead-acid gellcell and its good for two

The G11 should consume less than 1 amp per hour, but for safety's sake, estimate that rate. The DSC's consumption should be negligible but again, play it safe and estimate 0.5 amps per hour. If you

I use a 34 amp hour marine battery (a small battery, about the size used in rider mowers) for my G-11 /w DSCs and it lasts all night long even in the winter. I use marine batteries because unlike

I got mine at Nordic Bearing in Sudbury. I'm in Toronto now so can't get numbers and don't have my file. Call either Les at Nordic thru information..17055551212 or check skf webb for nearest

The battery pack that I use claims that a radio or TV can be operated for 20 hrs. On several occassions, by freshly charged battery went dead driving the G-11 with DSC. I couldn't understand

OK...where can I find one of these suckers??? I've tried a couple of local places with no success. Bill

Hi Paul...I've got that one but what I'm trying to do is extrapolate that to the 4x6"photo print of my star trails. If I had used the st-4 or st7e I know this would be a lot easier than photo

A simpler formula for #1 below is: Arc-secs per pixel = (pixel width / FL) * 206 You can nearly do this one in your head. Certainly with a simple calculator. It provides almost exactly the same

You know,my poblem has always been that I'm an economist and not a mathematician.I can tell you why or why not we'll never make any money at this but I can't figure out arctans...I'm going out to buy

Jimmy, 1. You can calculate arcseconds per pixel with the following formula: ArcSec = 3600 * ARCTAN( (PixelWidth * 10^-6) / FL ) Where: ArcSec = Width of Pixel in Arcseconds

Hi Neal,it's looking good.I put a third 1"long bearing in each of my axies and it improved nicely but not like yours. By coincidence,I offset my mount and took a few before and after startrails. The

Hi all, Well, I'm reasonably pleased with the improvement that I have been able to achieve in my G11's tracking and periodic error. Take a look at http://www.barry.net/Astro/losmandy_g11_ra_pe.html

That's great news. Thank you Scott.

yes.mine went in 3/4's by hand (very easy,slight pressure no banging) I might have put it all the way in but I felt using the thick washer and clutch handscrew would seat it better and more

What's the proper way to use the vernier markings on the manual setting circles?? I understand that it is to interpolate between hash marks, but it doesn't seem to work the same as my vernier

wrote: different city with the it turns movement it's axis off bearing Hi Jimmy OK, according to your post on sct-user's group #12966, I need bearing set skf ba2016. Since I don't use digital

Hello To All The bearing came packed in a shipping oil, after we installed them they were then lubricated with a Lithium grease. The mixture of this grease and the shipping oil whould harden in a