开云体育

I recently bought the cheaper version of this one from amazon ( https://www.amazon.com/dp/B0CP3YL6J7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ). I understand the usefulness of the AAir but I am more

On Wed, Dec 18, 2024 at 12:46 PM, Jamie Amendolagine wrote: > > I've been quite happy with the 8G version, but I normally run Linux. The > 16G / 512 version is only $229 though. As you mentioned, it

I have a last question resulting from a last minute doubt. All pics I have seen of Celestron branded Losmandy mount has a label on the side of the mount that confirms the Celestron Losmandy

John, chip I am sold . Thanks. Avi

Avi, The one knob saddle was on my 1997 mount before the restoration and which was promptly replaced. The angles in the cuts are slightly different than today's L-plates/rails, plus you do not get

I've been quite happy with the 8G version, but I normally run Linux. The 16G / 512 version is only $229 though. As you mentioned, it does not have the 12v power control. I just use a non computerized

There is really nothing wrong with the original Losmandy saddles, they are beautifully made and work very well as long as you only use Losmandy "D" dovetails or use a Losmandy D to V adapter.? But if

Chip, Got it. Looks like the mount I am interested in picking up has the older saddle which cannot accommodate Vixen plates. So I guess my options are as follows: 1. Replace current saddle with the

AFAIK there is no $200 model with a full speed N100 processor with enough RAM and storage for people using large sensor cameras imaging multiple nights with short subs.? Windows can run with 8GB but

Use the right part: *Losmandy G11 8" D/V saddle* ( https://store-losmandy-com.3dcartstores.com/g-11-spdv ) This has been the standard G11 saddle for some time now because this saddle can safely carry

Hi all One thing I wanted to confirm about the CG11. How does the telescope actually mate with the saddle and type of mounting plate I need. On my Skyguider Pro I used a William optica saddle and a

Hello Bryan, I have the same mount, the adjustment of the AR worm is quite simple, the only thing that is contrary to the sample video, I do the adjustment in several steps, first I separate the worm

This is a 6 month old G11T. I received an email from Tanya and in fact the worm adjustment is opposite from what is shown in a video they put out. Who knew? Any way lubing the bolts before tightening

I use Miele and it works well EXCEPT stellarium will close uncommanded when you minimize it but cartes du Ciel works. I'm still trying to find out why stellarium does this!!! Chuck

The meles go for around $200 with an n100 Intel chip. They come with windows 11. I dual boot to Linux and normally boot Linux for ekos/indi/PhD. -- jamie.amendolagine@...

The ASIAIR UI is tightly integrated and makes sense once you have some time with it.? But I don't like the handicapped autoguiding section which honestly would make it easier for experienced PHD2

If you have the inclination and time I'd go with a mini pc like a mele. You can then run the full indi / ekos stack that does not have competitor cameras disabled --? the asiair is using a branch of

Chip makes a valid point. ?With 3 systems in 1 package, you are 3x more likely to lose the item for repairs. ?Separate items allow swap out easier and cheaper. Plus, as he mentions, to upgrade. I

Make sure the worm gear is remaining parallel to the worm wheel and before fastening try a little synthetic grease under the bolt head and washer to help minimize the fastener friction as it is

Chip, What is the problem you see with the Duo design ? I am seriously considering a 2600MC Duo (not Air). Cheers, David Sent: 16 December 2024 01:14 To: [email protected] Subject: Re: