开云体育

That's worked great for me, reliably (running gemini 1 from mini PC). Bought 2, just in case chip dies out. https://a.aliexpress.com/_Ev6jse1

Hi Paul, Thank you for your clear response. Yes I am surprised to find so many cables with so many different pinouts. I am hoping someone who went through this process can make it less painful and

Ah, I see. You'll need an FTDI-based USB to RS232 adapter, usually with a 9 pin DB9 connector, such as this ( https://www.amazon.com/OIKWAN-Converter-Adapter-Chipset-Windows/dp/B08Q86PFV1 ). Then,

Hi Paul, I have not bought any FTDI or the cables.? That is why I am asking. Thanks, Roger

Hi Roger, what connector is at the output of your FTDI converter? Maybe share the model # so we can look it up.

Hi, I am requesting links to sources for the cable for connecting the Gemini2 serial port to USB with FTDI. I don't mind connecting 2 cables together to make one, but it is difficult to know which

Hi Wayback, Thank you for the good advice. I connected the Gemini2 USB to my laptop. Device Manager did not make any change. I tried with 2 different cables. So my conclusion is the Gemini2 must have

On Mon, Nov 4, 2024 at 03:01 PM, Fritz wrote: > > Thank you all again for the incredible amount of background and help! I > talked to Michael Herman in detail on the problem and it was decided

Could the old board be sold to someone who would either fix it or use it for parts to repair others?? (I am not the one, but surely it's some use to someone.)

Thank you all again for the incredible amount of background and help! I talked to Michael Herman in detail on the problem and it was decided that likely the best course of action is a replacement

Paul is totally correct.?? In general all Gemini's are repairable, 1s and 2s. ?? The only thing holding back some repairs may be PCB corrosion or intermittent faults!??? Older G1s are mostly a

Chip, Really very interesting. I just learned something new from you. Thank you. John

Chip…I took over Tom Hiltons role….”grumpy dad”! ? ?I police names and cross forum posts….the thought of it keeps me awake at nite! ? Hahaha. ?In reality if I could be 1:10th as helpful

I think you are mixing up the #492 Digital Drive - "DD"? with the original low resolution encoder Losmandy Digital Setting Circle - "DSC" sys

On Mon, Oct 28, 2024 at 05:21 AM, Roger Smith wrote: > > Hi ASIair users.... > This is a reposte in hopes of getting responses related to USB connection. > I am helping a friend set up his recently

IDK about bad juju but poor form maybe?? ?Just yanking your chain... -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric Forecast - South Pasadena, CA (

I use a Gemini 2 G11G with an ASIAir plus over USB without any connection issues. There are other issues, but USB works fine. I have used ethernet, but with NINA on a Windows PC.

Tom its bad internet juju to cross post the same question across the same user forums…aka Gemini IO group. I replied there. But Paul’s write up is better than mine cheers -- Brendan

The problem with a single axis is often caused by the PIC controller (the same one that was programmed with the L6 release). There are two of them, and it's a small SMD chip, not easy to replace

Hi Tom, Gemini-1 is fairly old and so electronics and motors need to be tested to make sure everything still works. The G11 mount itself can require some testing and possibly