开云体育

And of course controller repairs can be undertaken by Bren Smith, Michael Herman, and myself. We most likely have much shorter lead times. From: [email protected] <[email protected]> On

Section of the Gemini_users group and search Beta Ware. Please read all the warnings and instructions. I have been using the beta ware since 2018, but it is still considered experimental and is

Something's not adding up.? I need to double check my documented Gemini-2 settings.? I was flipping well past the meridian with the NBs in the 60's. ------------------------ Jim W Phoenix, AZ. USA

Guilherme, Sounds like you are an experienced user, but since the mount is new you should look at software solutions before making any mount adjustments. Since you are using NINA, I assume you are

Jim,? If you like your Gemini values Gemini-2 Eastern Safety Limit - 100 Western Safety Limit - 100? (puts the limit at time HA=00:39:53) Western GoTo Limit? - 10? (this puts the Gemini Meridian

Jim,? see my notes further down on "Max minutes".? Set it to just before the Gemini Western Safety Limit. -- Edward

We have to get this sorted. The flip worked for me during the winter, but now it does not. Most frustrating. Summer months are ok to do a manual flip, but not in the winter when it happens at 3.00 am.

I may try this during the daytime tomorrow.? Its suppose to hit 119F tomorrow so I am not going anywhere.. :) ------------------------ Jim W Phoenix, AZ. USA Losmandy GM811G

Edward - get back to us with the test results.? My settings are as follows.? This was working on NB 060 something.? I haven't retested recently.? I will as soon as I can see the stars (AZ

The difference in step size is due to the difference in guide pulse durations between East and West moves. The way Gemini implements a move, via a clock divisor, the step durations in the West and

I have had some further conversation with the NINA developers regarding how Meridian Flip settings work.? I thought I would share my summary here for those who might want to get NINA and Gemini to

The following description is my understanding for the regular gearbox, and will likely change for your 125:1 gearbox. The PEC index is not absolute and rolls over at every worm cycle (6400 steps), so

To check PEC, you could first confirm that the PEC index rolls over at 32000. You can verify that by going to the web interface, State page, and monitor the RA PEC Pointer while the mount tracks at

Its funny..Mclennan lists its 25:1 gearbox as P5-G11 Had a laugh....... -- Brendan

Just to follow up on my post - I asked McLennan about the play in the bushing seen in the video I posted.? To state the obvious, they said the bushing is very worn and not indicative of a new

When I've had the motors apart, the encoder discs are plainly visible as radial lines.? Since the encoder records the position as an on/off state, there's some quantum state of the motor position.

Hi Paul It was not even close to doing the Meridian flip. M101 was already past meridian (and when the issue happened the mount tried to go to the other side and point the telescope east) and the

Guilherme, You don’t say what time the meridian flip happened, it may just be due to it reaching the limits you have set for the mount. Paul

Eric, Thank you for the information you have provided. I have a far better understanding of what is going on under the hood. A final question, which I'm sure has been asked here many times, how is the

Hi folks We now have a way you can request and appointment for factory service or upgrade appointment here: https://store-losmandy-com.3dcartstores.com/svcres.html In the past year (due in large part