开云体育

Let's see what comes back from Groups.io. Personally, I find editing of one's messages long after they were posted to be objectionable. Not only will some readers have already read the "wrong"

I really think that’s all we need, which is close to what David was asking in the first place. Replying to the original message with the updates/corrections is even better, IMHO, but editing is OK

Let's also remember that some subscribers do not use English as their primary language. And they may rely on Google Translate or something else to interpret messages. What might be a minor typo could

Sorry for the noise... I guess the groups.io site somehow re-mails messages after editing and our mail server adds the default message again. Hopefully this one won't have the "official use only" tag.

Paul> I just put in a suggestion to groups.io to add an optional time limit on editing messages, of say a few minutes. This way the author can correct spelling mistakes and fix anything that's wrong

I just put in a suggestion to groups.io to add an optional time limit on editing messages, of say a few minutes. This way the author can correct spelling mistakes and fix anything that's wrong for a

It's a Gemini 1 version with no recess for a wave washer in the worm wheel. I don't see a stacking order in any of those posts or video. I've seen most of them, that's why I'm asking here.

PS on the Setting Limits video, you can see how i have mine set up https://www.youtube.com/watch?v=O0HdmnxXHrA [email protected]> wrote:

MA that is permanently attached to the FHD tripod? yes the Gemini controller mounts so that I can move to controller up onto the extension? yes -- Brian Brian Valente portfolio

Do the pier extensions (12", 8", 4")? mount between the RA head and the MA that is permanently attached to the FHD tripod?? If so, do they have the threaded holes to attach the prongs to which the

David, If you click on Groups.io in the upper left hand corner, you will see the groups you belong to, e.g. Losmandy_users. Check off the square box to the left of that group. Below the Groups you

There is only supposed to be a thin flat race washer (goes under the flat upper thrust bearing) and a thicker race washer (on the top). If added race washers they had better be very thin shims to get

Except however that it does not show to the level of below the ring gear exposing the thrust bearing (I assume because that involves removing the worm). Keith

The current breakdown on the axis is shown in the cleaning and greasing video: https://www.youtube.com/watch?v=MmR8yrlipzo -- Brian Brian Valente portfolio brianvalentephotography.com

My vote would be to disable editing FWIW D. Sent: 25 April 2021 14:20 To: [email protected] Subject: Re: [Losmandy_users_io] Editing posts - please don't There are a few options: * You can

The G11 shown on those sites is almost identical to mine (older) except the DEC axis shows 3 washers for the main gear thrust bearing.? Don't know about anyone else, but mine only has 2 (thick and

Here's another one, this one in Italian but should be easy to google-translate: http://www.astromaster.org/esperienze/G11maintenance.htm Regards, -Paul

Here's an old site (that doesn't exist anymore), but should still apply to modern G11: https://web.archive.org/web/20071226182035/https://astro.uni-bonn.de/~mischa/mounts/g11_disassemble.html Regards,

Russell, if it were a “Red Solo Cup” it would be quite stylish!! Good idea. Tom --- russmilt@... wrote: From: "Russell Milton" <russmilt@...> To: [email protected] Subject: Re:

There are a few options: * You can subscribe to the email digest -- this will include only the final copy of the edited message * Don't subscribe to email updates at all, use the website instead * I