开云体育

Oh, ok.? It's because you wrote this earlier: "Also, my outer block bearings should realign themselves because mine float and are pressed by a tangential spring.? So I think the inner block needs

The only self-alignment of the worm assembly is in the gear plane, radially towards the axis.? There is no tilt alignment.? If by tilt you mean a vertical motion in the direction of the gear axis,

Hi Users, I have an old Losmandy G11 with the two separate blocks and have consistently had issues aligning. I do not have the OPW block nor the spring loaded worm. It is a 492 control. I would

David, The pdf is on the right column, the HTML documents are on the left. You need the 'G-11 EQUATORIAL MOUNT <http://www.losmandy.com/pdf/g-11-manual.pdf>’ document. Paul

I don't see where this design allows for tilt self-alignment of the worm blocks

Good idea Alan, thank you.? I will hold off on the Belleville washers for now since I just changed my DIY spring loading such that the blocks and bearings should be aligned properly (see my other

Yes - purposely set the blocks so that there is too much axial play in the worm. Bias east heavy to test the right block, west heavy to test the left block

After seeing the 76 second cycle in my guiding most likely due to misaligned bearings (G11S two block worm) I decided to tighten the blocks on to the cover like a single piece worm block to get the

I agree with Paul but Keith brought up an interesting point and I assumed the LAT/LONG/TIME could be set from the PC Gemini? interface but it appears it cannot.? Leaning more toward what Keith wrote

Also, most web browsers have the ability to save an HTML page as PDF. Often this is found under the print function — an option to “print” to a PDF file instead of printing to paper. In this

Hi Glenn Is it possible for you to post a video of what you see? Depending on what you see, you might be talking about two different things If it's actually the clutch, you may have oil or grease on

I am unable to fully tighten the dec axis clutch on my GM811G. There's a quarter-inch play in either direction when the clutch is tightened down. Does anyone have a similar problem and is there a fix?

La G11T es una opcion real no cabe duda que ella si lo podria soportar con eficacia. Cierto es que el telescopio, mas guia y camaras se va de peso para fotografia. Es complicado elegir la montura, lo

David, et al, I share your preference for PDF. But for future reference, it is easy to capture the HTML by copying and pasting into Word (or just about any text editor). You can then save as a PDF or

Paul, Yes that does it, thank you - however a very kind soul sent me a scan of the original Celestron CG11 manual (I prefer PDF on my local machine to html . Thanks again Yamada San for the scan.

Hi! Maybe, just maybe, you have the same spikes as I have, Jamie. See the attached guide-log. First run is interestingly enough without spikes, 2nd and 3rd have spikes, all in the same direction (I

David, What you need is the G11 Equatorial Manual pdf on this page. http://www.losmandy.com/support.html <http://www.losmandy.com/support.html> Paul

Has anyone got a scan of this? Thanks, David

Good to know, Michael. The brass worms may wear over time, as they are softer than the ring gears, but at least they won't be corroding as well:). My original RA brass worm seems to have an slight

Hello David, You have a pretty big telescope and you must be an astrophotographer considering the specifications. As Brendan said, after adding accessories, you are getting pretty heavy, and might be