开云体育

This does work, Russ. I have a permanent pier set-up and usually loosen the clutches between sessions to load the OTA and then to balance. Just return the OTA to as close as you can to the CWD

Russ. I think you can do ?this. ? Just use park mount at home position. ?You set this as home. ? ?Then when you restart. You can “warm start” or “warm restart”. I think “warm start”

Hi, I went to the local post office in order to know the EMS cost and dispatch time.? Sadly the EMS service from Japan to most of the countries including the U.S. and Australia is now suspended due

Hi Russ! My short answer would be no. But that is because I've always built a new Alignment (Model) each time I set up. I do AP, so I've found that although close, things never land close enough to

Very interesting John. (If you still have the faulty hand controller, I'd like to get a chance to repair it. I have repaired at least one other hand unit. Let me know if you still have it! ) Folks

It will be a reduced number this year, Bill. I'll measure when I set up there (legs fully extended). My largest scope is an AP130edfGT. I'll be in touch. Wes

I had the same issue with my Gemini -1. The problem went away when I replaced the hand controller John

Hi Michael... I was thinking the same. -- Brendan

To facilitate mounting and unmounting my Celestron-11, I have been using a tip-in saddle as shown in this photo: This way I don't have to lift a 35+ pound OTA up to chin height to engage its dovetail

This sounds surprisingly like my last repair in which the extra serial port had corrosion...or a wire touching. The corrosion was shorting some wires leading to the CPU thinking it was getting a

Hi Michael, David and Brendan, Thank you for your quick reply.? Maybe it's unlikely, but I've asked Losmandy whether there is any upgrade program to Gemini-2. If such path is not available, I will

Yamada If it’s “cycling” it Initially it sounds like the HC “menu” button is stuck or shorted. ? But this does not explain why it reset nor garbage characters. ?Even with a bad battery

Yamada san – you should consider sending your Gemini-1 to Brendan Smith in Australia for repair: https://gemini-2.net/G1-repairers.html David Sent: 11 October 2020 17:32 To:

Thank you Brian.? I was not sure if that was same as the Gemini 2 system used on the Losmandy G11.? Really appreciate your help.

Wes, Oh man, I’d love to go to the Eldorado SP. When I lived in Austin that was one of my favorites. If anyone has a G11 with the legs extended and can make the measurement, I’d appreciate it.

Yamada-san, Contact expert repairer Brendan Smith, who is closest to you, in Australia, at: brenatlilydale@... He knows the Gemini-1 inside out and I'm sure will get it back to

Sorry Bill. Just packed it up for Eldorado Star Party. The legs were minimum height. And I have the G11T model. Wes

Hi, My G-11 Gemini-1 system, which is more than 15 years old, showed strange behavior last night. While capturing the Mars image, suddenly the image went somewhere out of the FoV of my ASI224MC. I

Hi Bill, You may very well want to add a 12" Pier Extension. It was a great accessory that also allowed me to extend my safety limits, for greater range of movement, as well as a very convenient

Tony, Part of the answer to your question depends on what you want to do with your equipment. Since you also ask about capture software, I am assuming you want to do astrophotography. However,