开云体育

Yes - what product are you looking at?

Hi all, I like the idea of an auto guider but don't want the hassle of using a computer, so have been looking at the stand alone units, if it says it is ST4 compatible will/should it work with my G11

I am trying to get PHD2 working and then do some autoguiding. I have been able to do autoguiding, using PHD2, with my CGX-L mount, but haven't tried it with my Losmandy mount,

What are you trying to accomplish?? Get PHD2 auto-guiding working -or- control the mount -or- start up the mount?

Robin Cassidy was bought by someone, and many parts are still available http://www.robincasady.com/Astro/ https://www.bndastro.com/Default.asp [email protected]> wrote: -- Brian Brian

You have the correct gearing so it may be academic at this point ;) The default when it ships is G11, which would explain the 360, and you do need to set it manually. Brian

Hi Brian, Type was set to G11T when I received it. I thought it should have been changed automatically too, but it wasn’t. I don’t recall if I tried setting it to another type and then back

I never heard of Robin Cassaday ( http://www.robincasady.com/Astro/ ) nor his (her?) products before. (Sorry. But not too proud to show my ignorance.) On my mount the "toe saver", as I often here

I need to replace a broken safety screw. It seems that the Robin Cassady product is no longer available. Are there any (better) options other than stock?

Hi Larry to -270 for the G11T. if you choose G11T from the Type screen, it should set the gearing correctly to -270 -- Brian Brian Valente portfolio brianvalentephotography.com

I am using NINA connected to my Gemini 2 with Ethernet. Haven’t ran PHD2 as I haven’t had anything but smoke and clouds here in Northern Colorado! PHD2 opened in NINA and connected to my guide

difference. that doesn't surprise me, good news than "hmm that seems about the same". if you are continuing this into the future, maybe a couple pieces of tape, one on the clutch knob and one on

I tried an Ethernet cable, and it didn't work. I re-tried the USB port, but this time I did a mount setup which a got with the little black button on the left of connect/disconnect button. I put in

Are you using PHD2 with the ethernet port or something else? ________________________________ Sent: Tuesday, September 29, 2020 6:11 PM To: [email protected] <[email protected]> Subject:

I would suggest using Ethernet. All the setup instructions are on the Gemini-2.com website. Worked for me first try.

Hi everybody. I have been using my new G11t for about three weeks, but I haven’t tried autoguiding with it yet. Today I plugged in my mount to my PC using the USB port on the Gemini box. I get a

I don't have a way to ensure that the nut is the same tightness, other than "hmm that seems about the same". I was thinking of 3d printing a part that I could clamp to the tightening nut and attach

I use Ekos/Kstars from Indilib.org too and am very happy with it.? It integrates a whole bunch of functionality including dome control of your observatory, planetarium control, autoguiding,

Lithium is the worst grease for the mount, it gets hot and drips and runs, it gets cold and stiff , it also dries up and leaves hard clay behind. Buy a true synthetic based grease with Teflon, I like

ah okay thanks how do you ensure you are hand tightening the same amount? jamie.amendolagine@...> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com