开云体育

ah okay thanks how do you ensure you are hand tightening the same amount? jamie.amendolagine@...> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com

This is how I used the torque wrench: https://photos.app.goo.gl/Li4R1KaeUmD3eDJQA So now I have a number that I can look at to see if my clutches are slipping and if it's time to clean them. I can

He just wants his own telescope!

Wow! That’s scientific! I had bought the Losmandy nonslip clutches, which seemed to achieve the desired outcome. However, while recently doing a bit of maintenance I seemed to have misplaced one of

I use lithium grease only for the worm & gear lubrication. No problems so far.

I'm not tightening. I'm measuring how much torque it takes to turn the shaft before and after cleaning the clutch disk. After cleaning the disk the shaft is roughly twice as hard to turn when lightly

Hi Jamie please avoid tightening with any tools - you really should not need to do that. it sounds like you more need to just clean the clutch disks, which is a good idea from your

Thought I'd give an update. So I got the alternative clutches, and tried one in the RA. Hard to tell if it's better or worse since I accidentally dabbed some lube on the pad, and it's not plastic, so

Another thing you might want to look into is the position of the plate holding the worm block. On my mount it is threaded into the RA body by 3 screws. There is a bit of play with the centering which

I guess I can give you my example of why we shouldn’t use it. My mount had the same grease for 10 years. It was the naval lithium grease someone recommended years ago. This is the result. I had

Hi Claudio factory specifically recommends against lithium grease. I forget the exact reason, but i recall talking with Scott that it ends up seizing up after a few

Hi, Any argument for advising against lithium grease? Thanks Claudio

Hi! And at the base of the ASIAir, is Indi :) Magnus Den 2020-09-27 kl. 15:22, skrev Bryn Evans via groups.io:

I found and fixed the DEC movement bug in my OnStep system.? I had assigned the DEC step pin to the same pin used for LED controls.? As a result, every time the LED was blinked, it turned my DEC

I use ZWO ASIAir pro which you can control wirelessly from your IOS or Android device. if you are a ZWO camera, filter wheel or electronic focuser unit, it can also control those. It can also control

Thanks all. I'm currently using a PC (Win 10 laptop) for this application though any platform could be an option in future (e.g. I have several RasPi's at hand). Just wanting to get up and running in

I think I understand what you mean Chip, relative to the rotation axis, tangential pressure by the Belleville washer and radial pressure by a spring plunger.? It seems like part 1 requires the outer

Henk, That is a very wonky system done long ago by others and found wanting in reliability and consistency. But I offer you a much better solution here for the insult. It looks like you have already

For a Windows 10 based PC/laptop you first need to install *ASCOM HUB software* ( https://ascom-standards.org/ ) and the *Gemini.net* driver/applet with the appropriate USB to RS232 serial converter

Or of course if using a Windies PC, Gemini-Telescope.net plus one of many programs such as APT, Cartes du Ciel, etc.. David Sent: 26 September 2020 18:25 To: [email protected] Subject: