开云体育

Yes. A funny coincidence that I live on Belleville Way, and I developed a taste for Belleville washers! Just a coincidence. My town of Sunnyvale was once named Murphy. I think his ghost still

[AMD Official Use Only - Internal Distribution Only] Ahh, Belleville washers... is there anything they can't do ? I'll have to try that... thanks !! BTW I was reading and appreciating the report

Hi gang, Here is the original file... which I intended to attach. best, Michael [email protected]> wrote:

Hi gang, I ran PE testing a few nights ago and then just today ran the PECprep program to analyse the data. The report is attached, and so is the PHD2 tracking file in case you want to try yourself

Try this site and restore your software in both the Gemini 2 and the HC. https://gemini-2.com/updatefirmwaremethods.php Hope it helps, Please stay safe and healthy, Chao

So being one to fly through the asteroids instead of around, I decided to try the Format SD Card in the Gemini 2 hand controller. And as you could imagine, I think I did some irreparable damage. Well,

HI everyone At your request (and against my wishes!) here's a replay of this session. https://www.youtube.com/watch?v=78tl5iW5yic thanks again to the 15 or so people who joined the live

Thanks Sonny! i'm sorry i didn't see you, but looking forward to next time wrote: -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Great Meeting Brian, very helpful! I wasn't prepared with a camera and microphone. but next go I'll use my Baby Dell, which has those. Thank You! -- SonnyE Sonny's Youtube Channel (

<<I encourage you to try the other post i mentioned>> Did you mean the Factory Reset video or something else?? Sorry if I missed something there.? I've watched the FR video a number of times, and

i'm doing a zoom presentation on setting up and using a microRouter to connect your Gemini to your computer 10:30AM pacific time (in about 45 minutes) Brian Valente is inviting you to a scheduled

Well that explains why the results were as they were! As and when I have the ‘scope out next time (could be ages) I’ll do it properly Blush David Sent: 26 April 2020 02:22 To:

Hmmm – I had set the G1 to use King mode. Odd – in the image I posted the main FFT peak was at or about 239 seconds – where did the 211 come from? Sent: 25 April 2020 21:40 To:

Hi all! This is a follow up on my potentially confusing issue about odd side of pier reporting by the Gemini 2. I think the issue is solved. Here is my understanding: Gemini 2 on the G11 reports

Hi! No shame on that, on the contrary, you contribute to our collective learning :) In any case, your reported RMS of 0.33" (if I get it right) is really impressive. It would be very interesting if

Yes its supposed to be "unguided" -- Brendan

Gang, There is a problem when you try to do polar drift alignment, loosening the big lockdown 3/16-18 bolts if the AZ and Elevation. They are either too tight to adjust the mount, or too loose to

[AMD Official Use Only - Internal Distribution Only] I tried swapping knobs between sides to see if the problem moved. As you might expect, rather than moving or staying put it went away

As far as I know that’s what you’re supposed to do isn’t it? Run PHD2 with guiding turned on and then give the log to PecPrep to analyse? If I did it wrong – I hide my head in shame …

I got a set of AKS knobs by mistake. Rather than return them, I did a follow up order of the TKS knobs I originally wanted. I pulled one of my AKS (Altitude Knob Set) and measured the protrusion of