开云体育

I have been experimenting with optimizing unguided performance with my G11 and wanted to share an example of what's possible right now. Most importantly, this is unguided and at a pretty good focal

Note that Stellarvue has designed and sells a wood tripod now.. No idea what it costs, looks like, or how well it works (or doesn't), but it's another option.. Stellarvue's Customer Service is second

As for a set of longer cables put me down for a set or two, Michael. Sent from my Galaxy Tab A

I'll be receiving my first case of this type of Gemini1 motor controller damage in about a week, to try a repair. Bren Smith and David Partridge are world experts in this type of repair. I've only

Good idea Michael, this takes no time and certainly cheaper than blowing your motor chip. Accidents can happen and they do. Sent from my Galaxy Tab A

great advice, i've nearly done that a few times also i would add never unplug/plug in while powered on!

Just so everyone (new) knows: If you were to mistakenly rotate the motor cable end, and shove it forcefully into the motor or Gemini incorrectly, you will blow out the motor control chip in the

Looks good to me Bill. I have some of these sheds for storing stuff. Mine are separating at the corners. Trying to figure out how to re-secure them. But like your ingenuity.

OK, Ethernet hooks up then later will not.? HC firmware updated to 2017, and no further.? Think I will just go USB for now.? Obviously Ethernet connection is not reliable.? Gemini II site states

Thanks Michael, I bet I would be interested in longer cables. But not until I actually do have a mount, and have had the time to experiment with how I would choose to route them. As for Identifiers,

Thanks Chuck:? I got hooked up earlier today.? Then I ran Gemini updater program.? That was a disaster.? It proceeded correctly, but when flash should have started, got bunch of error messages.?

Nice Derek, that you don't have to move. Nice place their in the Bay Area. Easy to get to dark sites.and not far from michael, if you need something or other.The Losmandy HD tripod is a beast. But I

Gary I had the same experience because Microsoft? 10 has tried to prevent intrusions into the OS.?? So I found two ways around Microsoft.? First,? manually add the IP address of the mount via

Thanks Tim:? I have 4 Win 10 computers.? None of them will auto detect Gemini II.? Net Bios is on.? Auto detect on, DHCP etc. Have tried multiple scenarios, numbers inserted IP, Gateway etc.

I already had this mount from my 12" LX200.. I left it out so long that the legs are no longer adjustable for length due to rust, and even though the legs are frozen at different lengths, it sits

ah i understand now. that makes more sense wrote:

Scroll thru this (not mine) that shows this clearly.. http://www.astroromp.com/astronomy/my_new_setup.htm Derek _____ Sent: Friday, January 31, 2020 8:05 PM To:

You're not following correctly.. G11 on an MA Adapter that is mounted to a Meade Giant Field Tripod.. There is a "spreader" and up thru the center goes a big T Handle Bolt thru the MA Adapter to a big

The other thread about how we each initially setup our portable setups was interesting to me.? I was preparing a response when I realized that I put in a permanent pier, and haven't used my field

if i'm following this correctly, your non-losmandy legs have only a center bolt and you've had to figure out workarounds for getting it to not rotate on top of the tripod? Boy that sounds like a