开云体育

The tripod part is, but the part that holds the mount is not – the holders for gemini is in back Technically I suppose you could do any leg forward but the gemini might get in the way of RA

Thanks Paul, Not entirely clear on how this forum format works, but getting the hang of it. I prefer to post links because I learned in the 1990's how images can really bog things down. (Modam-n

Yeah, the White House has conceded that the steel and aluminum tariffs have hurt domestic businesses. Still no plan to lift them.

anthony i would not rely on PHD for this, as PEMPro can be run and the results more accurately filtered. i'd just do that with and without PEC on and compare wrote: -- Brian Brian

To be clear, I have been looking to PHD2 report results, either the Log Viewer or the results from Guiding Assistant, to try to see if PEC is still working as it did upon initial

Yes, but to be clear, that was for a different manufacturer. Losmandy mounts can run PEC and PPEC (or any other guide algorithm) without problems. The best thing to do is head over to the PHD

Brian My memory is not what it used to be but..... You're right about Dec (Dec usually doesn't move anyway) but I distinctly remember (memory corrupted?)? they said there have been instances where

I should also add there is one mount company (not Losmandy) that has a poor mount-based PEC implementation, and apparently does not work well with guiding. for those poor souls, that have to disable

Chuck that's not quite correct, in fact PHD recommends in most cases the in-mount PEC is complementary to PHD guiding PHD has predictive PEC, which watches the worm period and models periodic error

Anthony My reading of the phd2 manual says you can use pec but they don't recommend it.?? Apparently,? phd2 has an active corrective function (whose name escapes me at this second)? that is

I was thinking that number in PHD2 would be lower with PEC, assuming other issues being equal, (I think mine is mirror shift.) I think I am hoping to shortcut measuring PE, with no luck. (Using PHD2

PEC isn’t going to fix drift. It is designed to reduce the small excursions due to tiny errors in the worm surface that cause tracking errors.

So I ran PHD2 Guiding Assistant with and without PEC turned on, and got only marginal difference in total drift error in RA over 250 seconds, (a little more than a worm cycle). That has contributed to

HaHa, Heres 2 pics. 1 of my 155 on the portable pier and on the Eagle. The Eagle looks much more impressive in the flesh! You might notice my lanyard upgrade for my HC which works on the mini and the

Thanks folks for comments.? I've abandoned crossover initial connection.? Trying to setup with Ethernet connection.? Gemini II site is some helpful, maybe... Have Win 10, AT&T internet, combo

I got curious and went hunting. In the Online G11 Manual I found what might be a good test to see if you bungled your PEC. *"* *Once you have used the PEC function for a while you may mistake its

It does not sorry. Cold start clears only the pointing model. Not the pec wrote: Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Brian- Your answer is a little confusing. Does cold start clear PEC?

Links are OK, files or photos in those two sections, as well as message attachments is what counts.

Most of the space used is in the photos section, about 500MB. Unfortunately, I had to upload photos manually from Yahoo, so most are under my name, even though they don’t belong to me. If there are