开云体育

https://indilib.org/forum/mounts/7065-losmandy-slew-goes-haywire.html

What are you using to guide? Usually guiding is unknown to the mount, and it's really up to the guide software to stop guiding on slew (there's an option for that in PHD) but i would not expect

OK so here's the log of the successful slew. I'll post to the indi forum and add the link here. Jamie

I'm going to get a reduced log of the successful slew and post that here. Next I'll post both to the indi forum. I haven't narrowed down which condition triggers it. I'm wondering now though if I

<newNumberVector device='Losmandy Gemini' name='TELESCOPE_TIMED_GUIDE_WE'> sounds like it's an Indi driver issue. have you tried posting to the indi forum? have you been able to determine conditions

I should try and be accurate instead of funny. I'm really not sure I understand the limits very well, but it was definitely not anywhere close to hitting anything, and it seemed to be in a safe

Hi Magnus There was a beta release of firmware put out to address this. You can search the forums here for it, or if you can't find it please drop me a line

Hi guys! So here is "Mr. Strange problems" with a really strange problem. What happens is this: at times the mount simply "runs away" (well, doesn't leave the back yard, but slews to a very strange

an iceberg, but strangely the telescope is pointing straight up at the sky, where there is definitely no iceberg assuming what you mean is RA was nearly horizontal, you could very well be hitting your

So what happened last night was roughly the same. I spent some time doing imaging, everything working just hunky dory. I then do a few slews and things go haywire again. After maybe the third slew the

OK, I caught it in the act with verbose logging last night. And wow that logging is quite verbose. 35G log file! Luckily it happened at the end so I can hopefully snip it down quite a bit. This is an

Thanks! :) Magnus Den 2020-05-27 kl. 17:14, skrev Brian Valente:

Function->object and coordinates -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Hi! I use Indi/ekos, but I'd need to test something by slewing to coordinates in windows, with gemini.net. However, I cannot find out how to type in coordinates to slew to. Anyone can guide me on

Glad to help Erik you’re the one fixing it not me. ?A notch in your skills! ? All I do is kinda look at it from basics being mostly the problems. I have had a HC misbehave like you had and this

Frank FYI we do not recommend lithium grease we use jet-lube mp-50 moly paste -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Presently experimenting with: Mobil 1 5w-30 Previously used: Slick 50 One Grease Multipurpose Grease Fortified with Slick 50 PTFE Chemistry Not smooth in the cold. Next: Lucas Oil White Lithium Grease

nice work Erik! [email protected]> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

OK, I re-calibrated and backed off the screws a little. It's responsive now! Thanks! Now its starting to cloud up for the rest of the week!

Dear Brendan, You make a really interesting point about a too-tight surface to the HC, but I gotta say I'm a little nervous about even slightly unscrewing something (by a half-turn) on a brand new