开云体育

was really low (around 0.5) and my understanding of a bad PA is that it would likely show in DEC more than RA. not necessarily - it would show as corrections primarily (or only) in one direction. if

Thank you both. Great info Michael, I'll definitely be checking all these areas Brian: I did go through that document but I also tried a lot of other things so my PHD logfiles are not clean. I will

Peter, Guilherme Have either?of you tried Edward's or my settings? ------------------------ Jim W Phoenix, AZ. USA Losmandy GM811G, NINA 1.11, ASI2600MC Pro, Sky-Watcher Scopes

the spec of the G11 is 60lbs imaging, 75lbs visual [email protected]> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

Michael, Thanks for this info. I assume the grease is for the worm? Your rig looks quite heavy. How much weight are you sporting? I have a 12" truss Newtonian that I want to mount in the fall. It

Vishal, I also recommend going for the G11 with your 130mm refractor.? I originally purchased a GM811G to carry a small 85mm refractor, then bought a G11 dec when I upsized to a 130mm refractor. I

Peter... You have revealed a clue to your RA drive issues: your 240 sec error (worm fundamental period) depends on which side of the meridian you are targeting. Try this: 1. Fully balance your RA by

Hi Greg - I'd love to see a few images of what you've done to? the mount. If I understand your description, you're basically just using the small rubber bands as some flexible shim material to keep

Alan, I will try a rigid one piece coupler. My RA has the OPW. I've found it's possible to feel it the gearbox is aligned or not with the coupler by rotating worm with your fingers. The nice thing

Hi Guilherme You have described perfectly the experience I now have. It used to work with 1.10 HF3 version, then stopped with 1.11 as I recall and certainly with the nightly builds. Good luck with

I'm just saying, that from a theoretical perspective, a one-piece coupler maintains a kind of symmetry where it's indifferent to whatever the shaft angle is, and thus it will rotate at a constant

I agree, get the g11

Hi I tried tonight, with latest Nightly build and settings below: Gemini: 99 ESL, 99 WSL, 11 WGL NINA: Minutes after meridian: 2; max minutes after meridian: 12 I was doing 5 minutes exposures. The

Hi David, Took your PEMPro data and ran it through on my laptop. I just wanted to see what kind of value range you were seeing in the Y axis, and the drift up and down is not that bad. I would say

Just to be clear this was done inside and I only did 1 sub after meridian flip to ensure the sequence would continue. ------------------------ Jim W Phoenix, AZ. USA Losmandy GM811G, NINA 1.11,

On Sun, Jun 20, 2021 at 01:47 PM, Chip Louie wrote: > > Marc, > > The original idea behind changing gearboxes was to eliminate the stock > plastic gearbox uncorrectable periodic errors caused by the

On Sun, Jun 20, 2021 at 07:07 AM, <pcboreland@...> wrote: > > There are a number of reasons to change out the gearbox from Losmandy. I > have the original ones with plastic tabs, their modified

Hi Vishal, With a few years of experience owning both a G11G and a GM8G IMO the GM811 is not the value you may think it is as there is little difference in cost but that limitation in payload is right

Running 1.11 NB 101 and just did a meridian flip using my previous posted settings taking 10min subs.? Subs continued after meridian flip - 1 subs. The meridian flip coding has changed between 1.10

Edward, I'm using NINA 1.10 HF3, but i can try the Nightly build. Regarding the HA after the tracking is paused. I looked at the Gemini.net app and it also stop counting. So what i said is for Gemini,