开云体育

Mark, Appreciate the responses. The truth is I have been battling this issue for the past 8 months when I couldn't use the mount at all. Before that it functioned well. Not this bad. To answer you

HI Sunil Here's my observations from your guidelog looking at your two longest runs 1. your settings are not very optimized for your conditions and equipment. your min move on RA is too high, it's at

oop sorry i see it here in the op let me look at it cyclops12321@...> wrote:

Hi Sunil scope should be slightly heavy eastward and the guide rate should be less than 100%. That way the RA never reverses and hence backlash is a complete non-issue. Mark is spot on here, RA

Sunil, First reaction is that RA backlash should never matter when guiding: The scope should be slightly heavy eastward and the guide rate should be less than 100%. That way the RA never reverses and

Hi, I own a ES Losmandy G11 Pmc8 variant of the Gemini2 system and I seem to have some serious RA backlash issues. I tried to get help in the ES Pmc8 forum but I was told to approach the Losmandy

Just an update from my guiding experiments with PHD2 on Christmas Eve. I changed over to a ZWO 120 MM mini guide camera (and this calibrated quite quickly because it is USB3). By playing with the

I'll weigh in on saying mineral spirits as a general cleaner. Wear some chemical gloves so you don't strip your hands. Denatured Alcohol is a good rinse agent. Again, protect your hands, and a mask or

I have used simple mineral spirits for several different mounts without trouble.? It even dissolves the goo in Synta mounts.? I have only had to resort to brake cleaner once, for a mount with

I agree with John Kmetz: full disassembly.? In addition to getting all the old lubricant and grit out and adjusting the worm mesh on reassembly there is also the opportunity to degrease the clutch

Hi Jim The Dec should be your latitude and the RA should be the current sidereal time, which is the current RA of the meridian. Do you have that available to you? Its a pretty simple calculation if

Jim, Perhaps the NINA Discord forum might give you the solution you are seeking. Best Regards, John

Robert.Ian: You know I just did this about a month ago and I did a full disassembly. I really wanted to get rid of the old lube and also any metal fines that accumulated when any two metal parts move

haha totally works! jamie.amendolagine@...> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com <http://brianvalentephotography.com>

I took my wife and kids to the "sandy hills" trails nearby to see this. We only brought binoculars and a dslr so there was no hope of a fantastic view or shot, but we had a lot of fun. Here's the shot

I am using the next-gen Sequencer and have an automated script.? When my targets are done for the night I want to park the OTA at the zenith so I can manually take flats.

just use Park at Zenith from the Hand Controller This is the approach i use as well, although I have Home set as a custom park position. my flat panel is on a stand nearby, so i just slew the scope to

Jim, Sequence Generator Pro is what I use, but I have tried NINA briefly. When I go to do flats and place my light panel over the objective I just use Park at Zenith from the Hand Controller or from

BTW, the zenith will be Dec = latitude. -Les

Superb presentation and photos to boot. Top notch.