?
Okay.? I managed to get a closer look at your equipment and the cable jungle.? From what I see there is no reason to use the risers.? Go back to directly mounting the tube rings on a longer dovetail, you may need the additional length for best balance, relocate the router to the tripod tray.? For the USB/power box and mini-PC you can 3D print mounts that fasten to the dovetail on opposite sides of the optical tube. Remove the guide scope mount and fasten the adjustable rings directly to the upper dovetail.??
?
With this configuration and the shortest cables tidied up that will reach all the parts of the rig you should only have a power cord going to the USB/power box, a power cord going to the mini-PC and an Ethernet cable going to the router on the tray.?
?
Most electronics will be more reliable with their own power supply.? This is why I reccome d two power cords to the mount and a seperate power cord to the Gemini-2. You will also need an Ethernet cable from the router on the try to the Gemini 2.? And the Gemini 2 will have its own small power cord.?
?
--
Chip Louie Chief Daydreamer Imagination Hardware?
Astrospheric Forecast - South Pasadena, CA?
?
?
?
Chip Louie