开云体育

CV joints

Dean Collins All Messages By This Member #3652 Today I heard about a local 23 racer who is changing his rubber donuts to CV joints. He says it is legal in our area. I don't know for sure. What is happening in that regard in your areas? Dean Collins
Murray Charnley All Messages By This Member #3653 I Australia its TABOO M charnley toggle quoted message Show quoted text -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Dean Collins Sent: Wednesday, 24 February 2021 10:22 AM To: [email protected] Subject: [L23Registry] CV joints Today I heard about a local 23 racer who is changing his rubber donuts to CV joints. He says it is legal in our area. I don't know for sure. What is happening in that regard in your areas? Dean Collins
Dean Collins All Messages By This Member #3654 Anybody else? Are CV joints OK in Europe? NZ? Dean Collins
elanman39 All Messages By This Member #3655 开云体育 Hi Dean, CV joints are not allowed for racing by the British Race Series or by the FIA as they are not considered period equipment for the pre-66 car category that the 23's run in. Hookes joints (aka Universal Joints) with sliding splines are accepted and quite? few including myself run them without problems.? Nick Sent from my Galaxy toggle quoted message Show quoted text -------- Original message -------- From: Dean Collins <collinsdean@...> Date: 27/02/2021 03:43 (GMT+00:00) To: [email protected] Subject: Re: [L23Registry] CV joints Anybody else? Are CV joints OK in Europe? NZ? Dean Collins
Don Hogue All Messages By This Member #3656 Does someone sell a conversion kit to replace the stock rubber donut system with this “U” joint sliding spline FIA/UK legal system? Also, does this system retain the small stoke “U” joints?
elanman39 All Messages By This Member #3657 开云体育 I had mine made up to my design by Tony Thompson Racing in the UK using the same size UJ at the inboard end as the stock one at the outboard end. Had no problems at all. Don't know of anyone selling such shafts. Sent from my Galaxy toggle quoted message Show quoted text -------- Original message -------- From: Don Hogue <donhogue@...> Date: 27/02/2021 16:58 (GMT+00:00) To: [email protected] Subject: Re: [L23Registry] CV joints Does someone sell a conversion kit to replace the stock rubber donut system with this “U” joint sliding spline FIA/UK legal system?? Also, does this system retain the small stoke “U” joints?
Eric Salomon All Messages By This Member #3658 开云体育 I used land rover series 2 front prop shafts. Fitted exactly. They were freely available back in 1975. ? Eric Eric Salomon & Co Chartered Accountants (SA) Tel 021 552-7905 Fax 086 6073568 E-mail? esalomon@... Website? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of elanman39 via groups.io Sent: Monday, March 1, 2021 1:00 PM To: [email protected] Subject: Re: [L23Registry] CV joints ? I had mine made up to my design by Tony Thompson Racing in the UK using the same size UJ at the inboard end as the stock one at the outboard end. Had no problems at all. Don't know of anyone selling such shafts. ? ? ? Sent from my Galaxy ? ? -------- Original message -------- From: Don Hogue <donhogue@...> Date: 27/02/2021 16:58 (GMT+00:00) To: [email protected] Subject: Re: [L23Registry] CV joints ? Does someone sell a conversion kit to replace the stock rubber donut system with this “U” joint sliding spline FIA/UK legal system?? Also, does this system retain the small stoke “U” joints?

Previous Topic Next Topic