Rigctld no worky
|
Jeremy Pierce via groups.io <piercejj@...> wrote:
Can't get RIGCTL to come on. Tried rigctld -m 4 and get the followingDo you have flrig running? `-m 4` tells rigctl to use flrig for rig control and it expects it usually on port 12345. (on localhost) 73 -dominic -- I came here to chew ass and kick bubblegum but I have no ass and I forgot my bubblegum at home so uhhhhhh (found somewhere online) |
|
Jason, I'm curious what you mean by the term REPO.? I did a format on my sd card, 64 bit debian build with Bookworm, and fresh 73 Linux install.? WINE doesn't install unless you do it under Pi Apps.? I had to run install on it and VARA HF twice for it to install those programs properly.? I did VARA FM with the WINE command, no problems with it except puts it under WINE tools instead of ham radio.? Easy fix.? I put 73 Linux on an old laptop and it works so much better than debian.? I just like the power consumption of the pi 4 better for use as a RMS gateway. Thanks and 73. KM6QAQ
On Monday, April 14, 2025 at 07:59:16 AM PDT, Jeremy Pierce via groups.io <piercejj@...> wrote:
Thank you for the share Jason Ya, I thought I had seen this issue in past emails and your fix.? I need to search the database to find what I need before pinging the group. KM6QAQ
On Monday, April 14, 2025 at 05:24:04 AM PDT, km4ack via groups.io <jason.oleham@...> wrote:
|
|
Dominic, I boot up, run FLrig, Run PAT Winlink.? Select either packet or VARA FM (same result).? Up pops the web based PAT Winlink page.? Doesn't read the frequency like it does on Linux Mint nor does the Conky Rigctl turn green.? Thanks for the assist. KM6QAQ
On Sunday, April 13, 2025 at 08:59:55 PM PDT, Dominic OE7DRT via groups.io <tidy.wing5149@...> wrote:
Jeremy Pierce via groups.io <piercejj@...> wrote:
>Can't get RIGCTL to come on. Tried rigctld -m 4 and get the following >error. No idea how to fix it. PAT config file looks good. Tried >numerous rebooted. No Bueno! KM6QAQ? Do you have flrig running? `-m 4` tells rigctl to use flrig for rig control and it expects it usually on port 12345. (on localhost) 73 -dominic -- I came here to chew ass and kick bubblegum but I have no ass and I forgot my bubblegum at home so uhhhhhh (found somewhere online) |
|
Problem got better - when starting packet modem RIGCTL flashed green then went red. Still don't read frequency from radio. FLrig was turned on and is working.
toggle quoted message
Show quoted text
KM6QAQ 73
|
|
Noticed a difference in TCP port number between LM and 73 Linux Pi build.? Do you fix Rigctl in Direwolf? Perhaps an incorrect port setting in FLrig??
toggle quoted message
Show quoted text
KM6QAQ 73
|
Jeremy Pierce
Dominic OE7DRT
km4ack