开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. KM4ACK-Pi
  2. Topics

Problems with fresh install of 73 Linux and WSJT-X through digirig no TX power likely sound settings related

 

No transmit power with WSJT-X on RPI 3 running bullseye using FT857D and Digirig , I believe it's low/no input into the RPI but can't seem to fix it :(
?
I've been using my laptop with WSJT-X with no issues, I wanted to setup the RPI so I could run FT8 without having to be in front of the rig.
?
The RPI3 has a fresh install of 73Linux over the stock OS. FLRig finds the radio and cat control and PTT tests both check out ok.
?
I have adjusted the RF gain and have no problems with RX audio I am able to RX and decode but when I go to call CQ or make a QSO the radio goes into TX and I see no output power on the tuner. This leads me to believe that there is a problem with the audio exiting the RPI headed to the digirig. I had TX power once briefly when tuning.?
?
I have opened alsamixer and turned off any muting I can find and turned the gain down to zero to boost the levels.
?
Something is missing though...?
 

开云体育

Not related to Linux but had similar problem the last few days with Windows and WSJT-X.? I was only getting half to a 1/3 audio out as noted on older sound control panel.? I updated to the newest version of WSJT-X and it fixed that problem.? Could see full audio out.? Maybe an update could help.?

?

KM6QAQ

73

?

From: [email protected] <[email protected]> On Behalf Of Michael KC1WDZ via groups.io
Sent: Sunday, March 30, 2025 12:34 PM
To: [email protected]
Subject: [KM4ACK-Pi] Problems with fresh install of 73 Linux and WSJT-X through digirig no TX power likely sound settings related

?

No transmit power with WSJT-X on RPI 3 running bullseye using FT857D and Digirig , I believe it's low/no input into the RPI but can't seem to fix it :(

?

I've been using my laptop with WSJT-X with no issues, I wanted to setup the RPI so I could run FT8 without having to be in front of the rig.

?

The RPI3 has a fresh install of 73Linux over the stock OS. FLRig finds the radio and cat control and PTT tests both check out ok.

?

I have adjusted the RF gain and have no problems with RX audio I am able to RX and decode but when I go to call CQ or make a QSO the radio goes into TX and I see no output power on the tuner. This leads me to believe that there is a problem with the audio exiting the RPI headed to the digirig. I had TX power once briefly when tuning.?

?

I have opened alsamixer and turned off any muting I can find and turned the gain down to zero to boost the levels.

?

Something is missing though...?

1 - 2 of 2