Pat Menu Rig Control Not working
|
I want to say mine wasn't working either.? You can manually tune your radio to the RMS digipeater you'd like to contact. I need to get back into Winlink. No narrow band RMS digipeaters near me.? So I might have to spring on VARA. Jeremy KM6QAQ 73
On Tuesday, October 22, 2024 at 07:35:09 AM PDT, Duff Morrow N5RDM <duffmorrow@...> wrote:
I have Hamlib and PatMenu only installed from 73Linux. I am not able to get rig control to work. FLRIG is open and functioning properly.
|
|
Are you clicking Start VARA modem in Pat Menu?? Order of operations should be: 1.) Get FLrig running 2.) Run PAT Menu 3.) Select Open VARA Modem (when opening the first time make sure it is configured) 4.) PAT Web UI will automatically open. On Tue, Oct 22, 2024, 15:34 Duff Morrow N5RDM via <duffmorrow=[email protected]> wrote:
|
|
It will help if you install Conky as well. Conky will tell you what is and is not running in the background and could give us some clues. If you don't want to install conky, that's cool. You will need to manually verify that hamlib is running after you choose to start the modem in Pat Menu.
?
--
73, de KM4ACK
|
|
|
Jeremy Pierce
Brian Dale
km4ack