开云体育

I'm running a pi4 8gb?
The error I keep getting is a "gpg no public key".
I have followed the?https://youtu.be/YIIC-iT6H-s video and haven't been able to get my GPS to work at all its the ublox7. I follow the steps and when I run cgps I get blank except on "NO FIX" and it never connects even out side for over an hour with a goof sky view. What am I doing wrong? Any help would be greatly appreciated?

Do you have a green blinking light on the GPS itself? If not, then the GPS doesn't have a fix. Which version of BAP are you running?

?
--

I am running 3.08 and I havent had a green light at all?

Let's make sure we are talking about the same GPS
If so, you should see a green blinking light on the GPS unit once it has a lock. Software on the Pi (installed or not) will not have any impact on the GPS unit getting a lock. If you don't have the green blinking light, the Pi will never get a grid because the GPS doesn't have a fix on the satellites.

--

Yes sir thats the one I have.?

Since you says that you have never seen the blinking green light even when outside, there is certainly an issue with the GPS. Are you using a USB 3 device in one of the USB 3 ports on the Pi? This is know to create enough RFI to jam the GPS If you aren't using USB 3 and still can't get a lock while outside, it's possible that you have a defective GPS unit.
--

I'm using the 2.0 ports due to the issue with the 3.0 I'm guessing the same thing I'll get another ordered and see if that changes anything? thank you for all the help?
73 (no ham license yet!)