开云体育

direwolf.conf set up

Jeff #12403 Have set up direwolf.conf except for the channel portion.? I am very confused on this.? I have read many different examples burt nothing seems to make sence. It seems Rasp pi info is light on this topic compared to windows. Direwolf, Xastir? ? ft2980r, Signalink, Rasp pi 4b 8g? bookworm Does any have an example?? I can provide info
Jeff #12407 Dire Wolf version 1.7 Includes optional support for:? cm108-ptt ? Reading config file direwolf.conf Line 105: Missing number of audio channels for ACHANNELS command. Audio device for both receive and transmit: plughw:3,0? (channel 0) Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3. Note: PTT not configured for channel 0. (Ignore this if using VOX.) Ready to accept AGW client application 0 on port 8000 ... Ready to accept KISS TCP client application 0 on port 8001 ... ? Now connected to IGate server noam.aprs2.net (69.197.140.169) Check server status here http://69.197.140.169:14501 ? [ig] # aprsc 2.1.15-gc67551b [ig] # logresp KO4PJW-6 verified, server T2MCI no tnc statement so I must be doing something wrong ?
Kelly K7MHI All Messages By This Member #12408 I’m not sure what you’re trying to do?? direwolf at the most simple is just setting the proper sound card (you listed #3)? and it should start decoding ax25 right away when launched? as for PTT you uncomment the line in config to match how your PTT works - if using a digirig or signal link - you just send it (don’t mess with cm108 configs) to the serial port and the hardware handles the PTT? k
Brian Dale All Messages By This Member #12409 If you're using a Digirig and your radio doesn't use CAT (like the FT-2980 for example) you need to uncomment the appropriate line that uses RTS signalling for PTT.? For the Signalink, yes no PTT setting is required since it has an internal VOX circuit which triggers PTT automatically whenever it detects outgoing audio. toggle quoted message Show quoted text On Sat, Jan 20, 2024, 20:45 Kelly K7MHI via <kellykeeton=[email protected]> wrote: I’m not sure what you’re trying to do?? direwolf at the most simple is just setting the proper sound card (you listed #3)? and it should start decoding ax25 right away when launched? as for PTT you uncomment the line in config to match how your PTT works - if using a digirig or signal link - you just send it (don’t mess with cm108 configs) to the serial port and the hardware handles the PTT? k
Jeff #12413 开云体育 Got that Parr.? Uncooment on pitt.? But no tnc shows up.? It just shows 8000 and 8001 is ready.? No sound card Sent from my T-Mobile 5G Device toggle quoted message Show quoted text -------- Original message -------- From: "Kelly K7MHI via groups.io" <kellykeeton@...> Date: 1/20/24 8:45 PM (GMT-05:00) To: [email protected] Subject: Re: [KM4ACK-Pi] direwolf.conf set up I’m not sure what you’re trying to do?? direwolf at the most simple is just setting the proper sound card (you listed #3)? and it should start decoding ax25 right away when launched? as for PTT you uncomment the line in config to match how your PTT works - if using a digirig or signal link - you just send it (don’t mess with cm108 configs) to the serial port and the hardware handles the PTT? k
Brian Dale All Messages By This Member #12414 Direwolf is the (software) TNC. To find the soundcard, open a terminal window and type: arecord -l? Find your soundcard on that list and edit direwolf.conf to point to the soundcard you found. Watch this video starting around 10:24. toggle quoted message Show quoted text On Sun, Jan 21, 2024, 07:43 Jeff <wasco8@...> wrote: Got that Parr.? Uncooment on pitt.? But no tnc shows up.? It just shows 8000 and 8001 is ready.? No sound card Sent from my T-Mobile 5G Device -------- Original message -------- From: "Kelly K7MHI via " <kellykeeton=[email protected]> Date: 1/20/24 8:45 PM (GMT-05:00) To: [email protected] Subject: Re: [KM4ACK-Pi] direwolf.conf set up I’m not sure what you’re trying to do?? direwolf at the most simple is just setting the proper sound card (you listed #3)? and it should start decoding ax25 right away when launched? as for PTT you uncomment the line in config to match how your PTT works - if using a digirig or signal link - you just send it (don’t mess with cm108 configs) to the serial port and the hardware handles the PTT? k
Jeff #12415 ire Wolf version 1.7 Includes optional support for:? cm108-ptt ? Reading config file direwolf.conf Audio device for both receive and transmit: plughw:3,0? (channel 0) Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3. Note: PTT not configured for channel 0. (Ignore this if using VOX.) Ready to accept AGW client application 0 on port 8000 ...? "nothing to enter in xastir" Ready to accept KISS TCP client application 0 on port 8001 ..."nothing to enter in xastir" ?
Jeff #12416 ** List of CAPTURE Hardware Devices ** card 3: CODEC [USB AUDIO? CODEC], device 0: USB Audio [USB Audio] ? Subdevices: 1/1 ? Subdevice #0: subdevice #0 Direwolf entry:? ?ADEVICE? plughw:3,0
Brian Dale All Messages By This Member #12417 I'm not understanding what you're saying but I'm at work?right now so not looking at a Pi. I can tell you that everything you need to setup your radio and xastir is on the video I sent you the link for earlier and this one: one:? toggle quoted message Show quoted text On Sat, Jan 20, 2024, 10:17 Jeff <wasco8@...> wrote: Have set up direwolf.conf except for the channel portion.? I am very confused on this.? I have read many different examples burt nothing seems to make sence. It seems Rasp pi info is light on this topic compared to windows. Direwolf, Xastir? ? ft2980r, Signalink, Rasp pi 4b 8g? bookworm Does any have an example?? I can provide info
Kelly K7MHI All Messages By This Member #12418 I assume you’re trying to set up xastir now?? ?“?nothing to enter in xastir”
Jeff #12419 ire Wolf version 1.7 Includes optional support for:? cm108-ptt ? Reading config file direwolf.conf Audio device for both receive and transmit: plughw:3,0? (channel 0) Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3. Note: PTT not configured for channel 0. (Ignore this if using VOX.) Ready to accept AGW client application 0 on port 8000 ... Ready to accept KISS TCP client application 0 on port 8001 ... ? Now connected to IGate server noam.aprs2.net (155.138.131.1) Check server status here http://155.138.131.1:14501 ? [ig] # aprsc 2.1.15-gc67551b [ig] # logresp KO4PJW-6 verified, server T2CAEAS rest of direwolf setting (minus call sign and password): ACHANNELS 1 CHANNEL 0 MYCALL "entered-6" MODEM 1200 AGWPORT 8000 KISSPORT 8001 PBEACON delay=1? every=30 overlay=S symbol="digi" lat=30^17.57N long=081^50.01W power=5 height=20 gain=4 comment="Jax FL" via=WIDE1-1 DIGIPEAT 0 0 ^WIDE[3-7]-[1-7]$\|^TEST$ ^WIDE[12]-[12]$ IGSERVER noam.aprs2.net IGLOGIN "entered-6"? "entered" IGTXVIA 0 WIDE1-1,WIDE2-1 IGTXLIMIT 6 10 ?
Jeff #12447 Okay,? Up and running.? YAAC running.? Whew.? Just create a post on the new YAAC error that just occurred.? Thanks for your help though!!!? Couldn't have gotten this far without you.
Jeff #12455 Success!!! Info:?? Yes!!! ADVICE plughw:CARD=CODEC,DEV=0? ?? this replaces the standard:? ADEVICE 1 plughw: 3,0 (signalink, ft2980r, rasp pi 4b)

Previous Topic Next Topic