¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. KM4ACK-Pi
  2. Topics

After run BAP flrig is not installed #flrig

 
Edited

Hi,

after long time I have to be busy in my job I started a fresh installation on my RP4 with BAP - thanks Jason for this great possibility. All runs smooth but Flrig wasn¡®t installed. Tried the update tool but it runs through the script but with no result. Terminal window shows that the installation script is running. Can¡®t find answers on this topic and how to check what was going wrong.?

73 de Erwin, OE1EKG?

Edit: In the directory there is a folder in /home/pi/Downloads/flrig-1.4.2 so it is on the Pi. Found the config.log:
 

¿ªÔÆÌåÓý

Hi Erwin,

Not sure what is happening in your situation, but during the last two days I have done about 6 times a fresh install of Build-a-Pi 3.0.8 without any issues on a Raspberry Pi 4 (4Gb). I used the latest Raspberry Pi OS: 2021-05-07-raspios-buster-armhf.

(The fresh installed were because I was trying to do all kind of crazy stuff, not due to issues with build-a-pi).

If you haven¡¯t tried it yet, I would just try another full fresh install.

(Just to be sure. Flrig is under ¡®Amateurradio, flsuite¡¯ menu option)

Hope you get it working soon.

Best regards,
Alex


Op 21 aug. 2021, om 10:43 heeft erwin.grabler@... het volgende geschreven:

[Edited Message Follows]
[Reason: Update with Infos on the Pi an Logfile]

Hi,

after long time I have to be busy in my job I started a fresh installation on my RP4 with BAP - thanks Jason for this great possibility. All runs smooth but Flrig wasn¡®t installed. Tried the update tool but it runs through the script but with no result. Terminal window shows that the installation script is running. Can¡®t find answers on this topic and how to check what was going wrong.?

73 de Erwin, OE1EKG?

Edit: In the directory there is a folder in /home/pi/Downloads/flrig-1.4.2 so it is on the Pi. Found the config.log:
 

Hi,

after long time I have to be busy in my job I started a fresh installation on my RP4 with BAP - thanks Jason for this great possibility. All runs smooth but Flrig wasn¡®t installed. Tried the update tool but it runs through the script but with no result. Terminal window shows that the installation script is running. Can¡®t find answers on this topic and how to check what was going wrong.?

73 de Erwin, OE1EKG
Are you running the latest version of BAP? There was some issues with the FLSUITE in 3.0.7 that were documented here

--
73, de KM4ACK
|
|

 
Edited

Hi alex,

thanks ... I have a PI image from March and after put the image on the SD i made the usual updates on the system, so it should be the actual kernel. I installed the BAP from:??with the comand I did in the past:?

git clone https://github.com/km4ack/pi-build.git \
$HOME/pi-build && bash $HOME/pi-build/build-a-pi
so it should be the BAP 3.0.8

I start a fresh installation cause its faster to find out if the same process results in the same problem. I report the results on thsi.

Edit: I did a fresh insrtalaltion with the newest Raspberry Pi image (2021-05-07-raspios-buster-armhf) and started BAP afterwards. Installation now was successful. Thanks to Jasons's work it was fast and smooth. Some interesting things:
+ Flrig is now installed but not in the Flsuite menu
+ ArdopGUI, Flrig, JS8utils and PAT menu are also in the Internet menu tab
+ GPS Update tool and XGPS are only in the menu accessories
How can I change this?

73 de Erwin, OE1EKG

1 - 4 of 4