开云体育

Pi 3b+ KM4ACK+direwolf+Bluetooth

Sergey Ivanov #1305 Ok gentlemen, I'm glad there is a group where I can ask a question. The crux of the problem: I am a small Linux specialist, I have pi3 b +, with installed programs from KM4ACK. There is a homemade tnc modem with bluetooth. There is a Motorola gm350, which is controlled by aprsdroid via a smartphone. What I need: I want to transmit APPS packets to the ISS using the PI-APRS program in the KM4ACK assembly. The question is exactly that I don't know how to force direwolf to use tnc bluetooth specifically. This is not a mobillinkd modem, but a home-made device based on arduino nano and hc-05 module. This device is seen by the UI as / dev / rfcomm0. I'm desperate. Can someone explain to me how to proceed in simple terms, since English is not my first language. Thank.
km4ack All Messages By This Member #1306 Hey Sergey, I don't think this is possible. Direwolf is a software TNC and you have the bluetooth TNC. To my knowledge, you can't have 2 TNC's in the circuit. -- 73, de KM4ACK \| \|
Don Poaps All Messages By This Member #1307 Follow the Mobi-Connect script and add the Bluetooth rfcomm0. I didn't use Pat Menu as the Bluetooth was not in the menu when I first got?going with Build a Pi. Modify to add your Bluetooth device. If I remember correctly on the Mobilink Website it showed info on how to turn on bluetooth. Just change it to the Bluetooth device. Just my 00.01 worth.? 73 Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink: va7qu@... Subject://wl2k ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ?? ?? ? toggle quoted message Show quoted text On Mon, Aug 31, 2020 at 7:13 AM km4ack <jason.oleham@...> wrote: Hey Sergey, I don't think this is possible. Direwolf is a software TNC and you have the bluetooth TNC. To my knowledge, you can't have 2 TNC's in the circuit. -- 73, de KM4ACK \| \|

Previous Topic Next Topic