开云体育

Hi all,

I have just gotten Build A Pi 2.2.1 up and running successfully.?

Raspi 4, Mobilinkd 2 (with factory cable), baofeng UV5r

This morning I was able to get Xastir working correctly with the Mobilinkd. Then, I rebooted the Pi and tried Pat.

I clicked Start Mobilinkd modem and that worked correctly. Upon trying to connect to two different 1200 baud packet stations, both ended poorly. One never timed out and the other was disconncted by the peer. A third attempt almost worked, but ended with an 'unexpected EOF'

I suspect I need to add a tx delay like is allowed in Xastir (I read about this in various locations and it worked for me).

Can someone help me with how to configure a tx delay working with Pat?

Thanks,

Ryan NN7M

Ryan,

Have you checked the mobilinkd settings to see if a delay can be set? You might want to ask Rob (Mobilinkd developer) if it's possible. /g/mobilinkd/topics
--

I was able to use the Mobilinkd config app on an android tablet to change the tx delay setting. I think that worked.?

One connection with a 1200 baud node completed, but that was the only one. I think there may be an incorrect setting, its suspicious that the connections all failed. I'll take a look at pat config settings.