开云体育

Until today, I have been playing with my BAP RasPi and QRP transceiver in my shack where everything is well grounded and I was using a grounded power supply to power both. Also using the permanent

Hello Jason, I use Hotspot Tools with my Xiegu/RPi/DigiRig/iPad and it works great when there is no internet available. Like others, I have been exploring RPi alternatives and acquired a mini PC and

much better :-) Let's see if we can get you back to square one. Run *rm -rf ~/pi-build* The above command will remove the BAP directory. Afterwards you should be able to run the following: *git clone

View … ok, I need to find that. Thanks for that, Don. And THAT is what it was all along !! I put the RPi on a larger screen and, lo and behold, there were the gauges !! I was able to set the Digirig

Look at View and click on what you want. Vara sits on top covering Action in Pat Winlink. Lucky Ready can find Winlink Gateways. I modified mine vara to show gauges only later *Don PoapsNew

I think you guys usurped the thread I started ! HI HI No problems - carry on. Jason - one possibility - I have been accessing the RPi using a iPad by VNC. That may not be enough desktop space to SEE

OK this is an issue with the x86 version not the pi version, It is because we are not using box86. So this is closed. Sorry all,,

Sorry that was meant for W1BAW. Multi Task not my best thing *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink: va7dgp@... <va7dgp@...>Subject://wl2k ALLSTAR

click ok on ARDOP error message. Pat Winlink Web Gui opened with rig control running. Will see if I can get it to connect. on 20. If Win ardop I'd see a waterfall. Not sure what to expect with linux

Start Modem > Start Vara HF > failure to start click ok Pat Winlink opens. ARDOP fails to start via Pat menu. [image: 2022-09-23-060100_1366x768_scrot.png] *Don PoapsNew Westminster, BC*VA7DGP DATA

Hope this makes it clearer. de 2M0WHN

Don, is the error message when you click on the open VARA link in Pat menu 2 or when you click on the Vara link in the main Ham radio menu ( which is what I do the Vara link in Pat menu might be

The vara on my laptop runs but I get a message saying it failed. As soon as I click OK on error message. The Pat Web Gui loads. I was banging my head on my desk trying to get the Xiegu G 90 (Digirig)

The VARA window should look similar to this: If not, you may have a bad install of VARA. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Thanks for the report. I created an issue ticket ( https://github.com/km4ack/pi-build/issues/424 ) for this and applied the fix that will release with the next version of BAP. -- 73, de KM4ACK YouTube

Can't read the small writing in the terminal. Zoom in on it please and post another pic. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

I've been banging my head on my computer desk with the Raspberry Desktop Pi OS using Intel version of Build a PI. Denis K0TX of Digirig posted a screen of FLrig 1.44 (I was running Win 10 on my

Jason - I had a similar problem to Mike's on the BAP 64-bit system here after the attempt to upgrade PAT. (32-bit system upgrade ran fine). Your fix, as outlined here, fixed the 64-bit upgrade

Are we talking about TQSL here? if so, it works for me on my Pi4 that set up with BAP.

Jason, That reinstall of PAT did the job.? Thanks for the time Mike AMRRON CORPS