Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- KM4ACK-Pi
- Messages
Search
Re: Pat Winlink Auto Download of RMS "Grid square not set in Pat configure" error
On Sun, Feb 20, 2022 at 03:39 PM, Taubin wrote:
I don't mean to be a hassle, but I've run into this issue today when running on a new pi build. Is there a proper fix for this currently? CheersAssuming you are running the latest Pat Winlink (0.12.1) and you are running Pi OS Bullseye, run the following commands: cd ~/patmenu2 git checkout master git pull ? -- 73, de KM4ACK
|
|
|
Re: Building js8call and wsjtx under Raspberry Pi OS - Bullseye
¿ªÔÆÌåÓýHi Jules, I'm glad that you've found the instructions useful! I haven't got
a 705 (yet) so maybe someone else could give you an advice. Pat
and ardop should be easy tasks if you utilize flrig for CAT
control. Just make sure to select the right alsa device for ardop. -- 73 Daff, LZ1DAF On 20.02.22 §Ô. 3:25 §é., Julius Madey
wrote:
Daf, this was a great help.? Wasn't installing js8call, only WSJTX at this point but had previous problems on Buster.? Did a fresh flash of 32 bit Bullseye 11.2 from the RP site and built that first on a 3B+......used the full version.? Then followed your instructions exactly.? The only problem I encountered was a missing CMAKE so installed that and everything went smoothly.? WSJTX 2.5.2.? |
Re: Known Issues 64 Bit BAP
VK2AHB
I ran the pi-build script in the directory. It confirmed that flrig and fldigi were not installed.? I got it to run again.? Lots of log scrolling up, seemed like hamlib was instqalling every Ham radio know to man.
THe log ended with checking for samplerate >= 0.1.1... no
configure: error: Package requirements (samplerate >= 0.1.1) were not met:
?
No package 'samplerate' found
?
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
?
Alternatively, you may set the environment variables SAMPLERATE_CFLAGS
and SAMPLERATE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
make: *** No targets specified and no makefile found.? Stop.
make: *** No rule to make target 'install'.? Stop.
make: *** No rule to make target 'clean'.? Stop.
Resetting swap size to default
Restarting dphys-swapfile (via systemctl): dphys-swapfile.service.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
flrig and fldigi still not installed. Paul VK2AHB |
Re: Building js8call and wsjtx under Raspberry Pi OS - Bullseye
Daf, this was a great help.? Wasn't installing js8call, only WSJTX at this point but had previous problems on Buster.? Did a fresh flash of 32 bit Bullseye 11.2 from the RP site and built that first on a 3B+......used the full version.? Then followed your instructions exactly.? The only problem I encountered was a missing CMAKE so installed that and everything went smoothly.? WSJTX 2.5.2.?
Using a 705 with the FT8 preset .... tried manually setting the USB com on the 705 first but what worked in the end is the FT8 preset ... not sure what the difference is. 73 and thanks again for the great help. Now to try to get PAT and ardop working with the 705. K2KGJ-Jules |
Re: Rigctrl & pat
I too have everything working when using pat and ardop. I am having an issue when using GARIM though. I have it set up and it connects to ardop no issues, but when I tell garim to beacon, it fails to key the radio. Does anyone have a suggested configuration for a KX3 using a normal usb sound card and full rig control of KX3 to get garim to work?
|
Re: FLrig
See hot audio message. it's a Xiegu G 90 Later Don va7dgp On Sat, Feb 19, 2022, 5:07 AM km4ack <jason.oleham@...> wrote: Which radio are you trying to configure with FLRIG? Screenshots of the FLRIG setting screen would also be helpful. |
Re: Hot Audio
I thought Alsamixer adjusted audio. F6 etc. I'll have to find info on how to change it.? After all those issues my PI 4 works like a charm. PI 3A+. I haven't been able to connect to a Winlink Gateway with my mobile setup either by PI or my Toughbook. Closest Gateway is across the River in Delta BC and the next is on Vancouver Island. Heading to our Saturday coffee meet. We have some Unix and Linux that can help me with hot audio. Later Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink: va7qu@... Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232 ? ? ? ? ? ? ? ? ? ? On Sat, Feb 19, 2022 at 5:08 AM km4ack <jason.oleham@...> wrote: I use PulseAudio to adjust the incoming levels. The annoying thing is that you have to adjust each time you open JS8Call. |
Re: PAT auto connect fails to key PTT
#pat
That dialog box is a little misleading. You have to read the bold text at the top of the box to know the state. Currently, the dropdown always indicates true. I hope to resolve that in an upcoming release of Pat Menu.
-- 73, de KM4ACK
|
|
|
Re: GridTracker problem
#bullseye
#bap
#wsjt-x
#gridtracker
Are you running a 64bit version of Bullseye?
Did you see my attachments on the error I am receiving? Randy VE3YRG |
Re: GridTracker problem
#bullseye
#bap
#wsjt-x
#gridtracker
That will be great, but just wanted to comment that Gridtracker is working with no issue on my fresh install of bullseye and build a pi. I did not have to make any changes at all-it just started right up, so there must be some other issue.
|
to navigate to use esc to dismiss