You may have deleted your BAP directory. You can reinstall BAP with the following commands:
cd
git clone https://github.com/km4ack/pi-build.git


--

If you have 3.0.8 installed there should be a shortcut in the menu under the ham radio section. If it isn't there, you can run the BAP update script from the command line with
~/pi-build/update


The github address is

--

FLrig can be set to automatically turn the rig on and off (found in the FLrig extra controls under the Misc tab). It's a useful feature, but sometimes the apps I use don't utilize FLrig so there's no way to turn the rig on or off remotely before running the non-flrig-dependent app.

Is there a way, a simple app or widget, that does nothing more than turn the radio on, and another that does nothing more than turn the radio off? Simply running the app would allow me to power up the radio, run an app that doesn't require FLrig, and then power of the radio.

Hello to the forum,

I went the next steps in the configuration (after Flrig, JS8Call and WSJTX setup) to PAT. Made the configuration (incl. Port change to 5050) but in the terminal window I got the following errors. It looks like that the system can't find the sound card. In WSJTX I use (only tested receiving):

alsa_input.usb-GeneralPlus_USB_Audio_Device-00.analog-mono
alsa_output.usb-GeneralPlus_USB_Audio_Device-00.analog-stereo


TERMNAL

开云体育

When in to my PI's drop down menu clicked on preferences then build-a-pi

Now I get the error message:? Invalid desktop entry file: */usr/share/applications/build-a-pi.desktop

????????

开云体育

About 3 months ago I installed (I thought it was) BAP and it had a GUI to select what apps to install....

1.? I cannot find it on my PI to run it again (no icons in the click down main menu).

2. I can not find it on KM4ACK's git hub site to reinstall it???

I'm not a rocket scientist when it comes to PI's...? Any help would be great.

FYI I have ver. 3.0.8 of BAP

Hi alex,

thanks ... I have a PI image from March and after put the image on the SD i made the usual updates on the system, so it should be the actual kernel. I installed the BAP from:??with the comand I did in the past:?

git clone https://github.com/km4ack/pi-build.git \
$HOME/pi-build && bash $HOME/pi-build/build-a-pi

Jason,

Thanks....I'll try the 891 menu settings part of the article.

Ken KB4XT

I did a new Build-a-Pi and the N3DJS build.
It worked immediately on fldigi, flrig, wsjtx. But the Build-a-Pi didn't work at all.
I read about 7610 problems with flrig on the fldigi site.

I'm going to compare the settings to see what's wrong.?
Any ideas?
--
73, Bo W4GHV

I got sidetracked on packet and tinkered with Winlink & vara with the PC.
Cleaning shack I found my teensy pi tnc board.
Question. Can I EASILY use it on my build-a-pi?

Otherwise I'll find a use for the handy teensy.
--
73, Bo W4GHV

I followed this website for changes that needed to be made for digital work with the 891


--

Hi,

after long time I have to be busy in my job I started a fresh installation on my RP4 with BAP - thanks Jason for this great possibility. All runs smooth but Flrig wasn‘t installed. Tried the update tool but it runs through the script but with no result. Terminal window shows that the installation script is running. Can‘t find answers on this topic and how to check what was going wrong.?

73 de Erwin, OE1EKG

Are you running the latest version of BAP? There was some issues with the FLSUITE in 3.0.7 that were documented here

--

开云体育

Hi Erwin,

Thanks again for a 100% system
when i want to send a photo via pat mail. Does pat autosize photo?
or must photo ve a certain size for using pat mail and ardop

reason for question is that seems if we use the windows way it send a bigger file than compared to pat mail

de v51pj
pieter jacobs

Hi,

after long time I have to be busy in my job I started a fresh installation on my RP4 with BAP - thanks Jason for this great possibility. All runs smooth but Flrig wasn‘t installed. Tried the update tool but it runs through the script but with no result. Terminal window shows that the installation script is running. Can‘t find answers on this topic and how to check what was going wrong.?

73 de Erwin, OE1EKG?

Edit: In the directory there is a folder in /home/pi/Downloads/flrig-1.4.2 so it is on the Pi. Found the config.log:

Thank you Jason for the command line work. ?The system is currently updating!

tahe care,

Sean

Same issue it installs when I try run it get error Failed to execute child process “xterm” (No such file or directory)

This pi does have patch on it

Please send me your FT-891 settings. I am trying to figure out why my Pi's don't work as they should.

As a starter, to help me diagnose my problem, I need your FT-891 settings (i.e.those settings that you have changed from factory settings)?

My hardware setup includes:
1. Signalink
2. USB cable between Pi? & the FT-891
3. Pi 3B or a Pi 3B+
4. FT-891 (Later, I will also use a FT-818)
5. KB, Mouse, Monitor (I will go headless later, using my Chromebook)

My primary interest at the moment is getting WSJT-X FT8 going for POTA portable operation. I have loaded BaPi on both versions of the Pi. Separately, I have loaded WSJT 2.4 and hamlib 4.2 independantly on to the Raspberry OS. This works mostly except power level. BaPi versions won't transmit.

A while back, maybe a couple of years, I had the Pi's going with WSJT/Hamlib.... thoroughly documented. This no longer works with the advent of WSJT 2.4 and Hamlib 2.4. PS: I have been using FT8 every since it came out, mostly in my base station FT-991......still working to this day.

Eventually, I'll get around to using other features of the BaPi system.

Thanks,

Ken KB4XT

Problem Solved (as far as I can tell)

I run JS8Call in SSB mode instead of Digital mode so I needed to change menu #106 "SSB Mic Select" to "REAR". ?? For some reason I think win7 was letting me get away with leaving #106 set to "Mic".

...and for some reason the front mic is still working fine in SSB

Fritz NM5XD

&*%@^...? I just tried to edit my last post but managed to delete it some how

(try #2)
I changed the mode "Settings>Radio>Rig Options>Mode" to Data/Pkt per Benjamin's suggestion and I get audio going to the radio (got a reply to an HB).? BUT... when the radio goes into Data USB mode I get an ugly splatter on the waterfall. Nothing is being transmitted but the radio is sending a nasty tone to JS8Call.

Still some bugs to sort out but at least it's progress. Thanks for the help!

Fritz NM5XD

P.S.? I do have #142 VOX set to DATA