¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. KM4ACK-Pi
  2. Messages
Expanded Topics Messages Polls
Date
Re: Error running Vara scripts posted

Tim Tyler 001
 

This is a bit late, but I¡¯m running Linux on an HP Envy360 laptop with I7 2 core, 16gb ram.
--
Tim Tyler I KI5OOS
Re: Error running Vara scripts posted

Tim Tyler 001
 

Thank you, Curt. You¡¯re correct. Not time wasted. Now, with a fresh Linux Mint install and NO/Zero Wine installed, can I follow Jason¡¯s script for installing VarAC? Good question, I know. I ran into issues with missing files in the Wine installation and was be-deviled by not being able to use the 32bit prefix. My system kept telling me ¡°You have a 64bit Wine installation.¡±

I guess I also need to install 73Linux because that will get the two Vara modem programs¡­

Note: I thought, via the Linux browser I could just download, unzip, and install the two modem programs. Is that wrong?

I have bald patches now. HA! Thanks for your patience. Maybe I can help down the road when someone else needs hand-holding?

Tim
--
Tim Tyler I KI5OOS
Re: Error running Vara scripts posted

 

Yea. I want to second that comment from Curt.?

You will learn more, also you don¡¯t need to blow away all the ?stuff likely (only .wine) but I recommend just learning by fun break and fix it over and over.

If you were on pi and moving to mint things will go much smoother at the moment (Intel vs arm)?

k
Re: Error running Vara scripts posted

 

On Fri, Jan 26, 2024 at 11:28 AM, Tim Tyler 001 wrote:
(Gosh. This was a time-waster extraordinaire - but my fault for being a noob.)
--
Tim Tyler I KI5OOS
Never consider it a time waster... consider it a learning experience.

Just because you are just getting into this, doesn't mean it is your fault.?

You learn by trying, and if you run into issues, that just means you will learn more when you find/figure out the issue.
Re: Error running Vara scripts posted

Tim Tyler 001
 

Kelly - thank you! I¡¯ve decided to start over. Wiped the hard drive and re-installed Linux Mint. I will probably just buy Evolve Maestro to run VarAC. (Gosh. This was a time-waster extraordinaire - but my fault for being a noob.)
--
Tim Tyler I KI5OOS
Re: Error running Vara scripts posted

 

Re reading your error?

blow away your wine drive environment and start over in 32bit (delete one profile and set a new one up) the virtual wine environment you made is 64 and you may have already went back to 32?
Re: Error running Vara scripts posted

 

You will not be able to run any scripts as part of this project I don¡¯t think ¡ª ?for vara they are all broken in latest bookworm and buster due to a few things (see the vara sticky post in groups.io)?

as for varac I noticed it can¡¯t run easily in new wine 64 wow?

The quick answer I have in theory is that the NEW wine 8-9 wow64 is very new released just weeks ago in main branches?

I was having a lot of issues with varac as well it did work but I have a collection of bugs to iron out before reporting myself?

this is advanced fun but I assume reverting to 32wine will solve I need to test?

Set the?WINEARCH?environment variable to?win32?i.e.?export WINEARCH=win32

this isn¡¯t a full how to but hope this puts you on path - I will lab up a little likely this weekend?


vara seems to be working fine and the new wine version is very nice so excited for it?

Hold back wine/box updates or backup before trying new wine !!!!

kelly?
Error running Vara scripts posted

Tim Tyler 001
 

warning: wine cmd.exe /c echo '%AppData%' returned empty string, error message "wine: WINEARCH set to win32 but '/home/tim/.wine' is a 64-bit installation."

I need some help fixing this error, please?

The above error is what I get as I work my way to bottom of Jason's instructions for installing VarAC from:


Thanks, in advance. (Note: I'm a total Newbie to Linux and Wine.)
--
Tim Tyler I KI5OOS
Re: Conky

 

Conky at the moment appears to have no development?

they never adopted Wayland?

k
Conky

Francis Geraci
 

My "Conky" is a black monolith, like from the movie "2001". Happened after an update scan.?
Any idea's ??
FLDIGI on Yaesu FTM400 using a Digirig

 

Has anyone made the above work using a Digirig?

I also have the factory programming cable as an option.

Thanks in advance

Chris
ZL2TCH
Re: Download Gateway List

 

¿ªÔÆÌåÓý

Just figured your message out¡­.you have run config.

Is your gps hooked up and working?


On Jan 21, 2024, at 11:13 AM, Kenny Witt <kennywtn@...> wrote:

?What happened when you ran Pat.config?


On Jan 21, 2024, at 9:15 AM, W4ACR-Randy Shell <randywshell50@...> wrote:

?When trying to download a gateway list I get this error. SEE ATTACHMENT.

When i run pat configure it shows that my locator is set to EM75tl.

Can someone help?
<Screenshot from 2024-01-21 09-08-49.png>
Re: Download Gateway List

 

¿ªÔÆÌåÓý

What happened when you ran Pat.config?


On Jan 21, 2024, at 9:15 AM, W4ACR-Randy Shell <randywshell50@...> wrote:

?When trying to download a gateway list I get this error. SEE ATTACHMENT.

When i run pat configure it shows that my locator is set to EM75tl.

Can someone help?
<Screenshot from 2024-01-21 09-08-49.png>
Re: direwolf.conf set up

Jeff
 

ire Wolf version 1.7
Includes optional support for:? cm108-ptt
?
Reading config file direwolf.conf
Audio device for both receive and transmit: plughw:3,0? (channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3.
Note: PTT not configured for channel 0. (Ignore this if using VOX.)
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
?
Now connected to IGate server noam.aprs2.net (155.138.131.1)
Check server status here http://155.138.131.1:14501
?
[ig] # aprsc 2.1.15-gc67551b
[ig] # logresp KO4PJW-6 verified, server T2CAEAS

rest of direwolf setting (minus call sign and password):

ACHANNELS 1

CHANNEL 0

MYCALL "entered-6"

MODEM 1200

AGWPORT 8000
KISSPORT 8001

PBEACON delay=1? every=30 overlay=S symbol="digi" lat=30^17.57N long=081^50.01W power=5 height=20 gain=4 comment="Jax FL" via=WIDE1-1

DIGIPEAT 0 0 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$

IGSERVER noam.aprs2.net

IGLOGIN "entered-6"? "entered"

IGTXVIA 0 WIDE1-1,WIDE2-1

IGTXLIMIT 6 10








?
Re: direwolf.conf set up

 

I assume you¡¯re trying to set up xastir now??

?¡°?nothing to enter in xastir¡±
Re: direwolf.conf set up

 

I'm not understanding what you're saying but I'm at work?right now so not looking at a Pi. I can tell you that everything you need to setup your radio and xastir is on the video I sent you the link for earlier and this one: one:?




On Sat, Jan 20, 2024, 10:17 Jeff <wasco8@...> wrote:
Have set up direwolf.conf except for the channel portion.? I am very confused on this.? I have read many different examples burt nothing seems to make sence.
It seems Rasp pi info is light on this topic compared to windows.

Direwolf, Xastir? ? ft2980r, Signalink, Rasp pi 4b 8g? bookworm

Does any have an example?? I can provide info
Re: direwolf.conf set up

Jeff
 

**** List of CAPTURE Hardware Devices ****
card 3: CODEC [USB AUDIO? CODEC], device 0: USB Audio [USB Audio]
? Subdevices: 1/1
? Subdevice #0: subdevice #0

Direwolf entry:? ?ADEVICE? plughw:3,0
Re: direwolf.conf set up

Jeff
 

ire Wolf version 1.7
Includes optional support for:? cm108-ptt
?
Reading config file direwolf.conf
Audio device for both receive and transmit: plughw:3,0? (channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3.
Note: PTT not configured for channel 0. (Ignore this if using VOX.)
Ready to accept AGW client application 0 on port 8000 ...? "nothing to enter in xastir"
Ready to accept KISS TCP client application 0 on port 8001 ..."nothing to enter in xastir"


?
Re: direwolf.conf set up

 

Direwolf is the (software) TNC. To find the soundcard, open a terminal window and type: arecord -l?

Find your soundcard on that list and edit direwolf.conf to point to the soundcard you found.

Watch this video starting around 10:24.



On Sun, Jan 21, 2024, 07:43 Jeff <wasco8@...> wrote:
Got that Parr.? Uncooment on pitt.? But no tnc shows up.? It just shows 8000 and 8001 is ready.? No sound card



Sent from my T-Mobile 5G Device


-------- Original message --------
From: "Kelly K7MHI via " <kellykeeton=[email protected]>
Date: 1/20/24 8:45 PM (GMT-05:00)
Subject: Re: [KM4ACK-Pi] direwolf.conf set up

I¡¯m not sure what you¡¯re trying to do??

direwolf at the most simple is just setting the proper sound card (you listed #3)?

and it should start decoding ax25 right away when launched?

as for PTT you uncomment the line in config to match how your PTT works - if using a digirig or signal link - you just send it (don¡¯t mess with cm108 configs) to the serial port and the hardware handles the PTT?

k
Re: direwolf.conf set up

Jeff
 

¿ªÔÆÌåÓý

Got that Parr.? Uncooment on pitt.? But no tnc shows up.? It just shows 8000 and 8001 is ready.? No sound card



Sent from my T-Mobile 5G Device


-------- Original message --------
From: "Kelly K7MHI via groups.io" <kellykeeton@...>
Date: 1/20/24 8:45 PM (GMT-05:00)
Subject: Re: [KM4ACK-Pi] direwolf.conf set up

I¡¯m not sure what you¡¯re trying to do??

direwolf at the most simple is just setting the proper sound card (you listed #3)?

and it should start decoding ax25 right away when launched?

as for PTT you uncomment the line in config to match how your PTT works - if using a digirig or signal link - you just send it (don¡¯t mess with cm108 configs) to the serial port and the hardware handles the PTT?

k
1401 - 1420 of 13744