Re: Fix for Conky background on Pi (Wayland)
I am not using Wayland.? I switched back to "X." Wayland was causing problems with my VNC and other things.? I still get a black Conky? rectangle on my Pi-OS after installing 73Linux.? I have
By
David
·
#13825
·
|
Need help with Pi and USB card/device changing at reboot
Good morning, I have watched a lot of your YouTube videos, but I need help with something I can't seem to find a good clear answer on. If my raspberry pi reboots it consistently changes the
By
Mike NZ4K
·
#13824
·
|
Re: Setting up Pat Winlink on my pi: wrong port for flrig?
Sir, I've been having similar problems with the PAT Script page not reading my frequency for VARA FM and Packet.? Jason had me perform delete commands for hamlib as he thought I might have two
By
Jeremy Pierce
·
#13823
·
|
Setting up Pat Winlink on my pi: wrong port for flrig?
Good morning, I am working on setting up Pat Winlink with ardop, and I have run into a few interesting issues. Firstly, when I installed the various applications, I have to wonder if I had some sort
By
donn.hussey@...
·
#13822
·
|
Re: Xastir and the internet
Thank you for the feedback! Sent from [Proton Mail](https://proton.me/mail/home) for iOS
By
Don
·
#13821
·
|
Re: Xastir and the internet
You probably should have only 1 igate and digipeater running at a time so pick out which one you want. If you want a GUI, then pick Xastir or YACC (YACC is much better than Xastir IMHO). If you want
By
Brian Dale
·
#13820
·
|
Xastir and the internet
Good day Do both Direwolf and xastir need inet access for the igate? or just direwolf?
By
Don
·
#13819
·
|
Re: Botspot Windows 11 on Pi
I loaded BVM on a Pi4 and set it up? as a VHF packet and VARA FM RMS Gateway.? Working well so far. Brian K9KQA
By
K9KQA
·
#13818
·
|
Re: Rigctld no worky
I deleted the 4.5.4-1 libraries that show under load software in the repository. Packet worked a few times. Couldn¡¯t get VARA to work so ran 73 Linux update 4.6 and now neither packet or VARA work.
By
Jeremy Pierce
·
#13817
·
|
Re: Botspot Windows 11 on Pi
Denis, the ¡°exit on transmit¡± problem seems suspiciously like RFI. That would be something to look into. Yesterday, I also installed the BVM on a spare Pi 4 with 8 GB RAM, running Bookworm over
By
Steve Johnson
·
#13816
·
|
Re: pi4/5 power supply
The Raspberry Pi 5 normally requires USB-C Power Delivery protocol ( *PD* ) to operate. The PD spec only requires 3A at 5 volts, but the RPi5 bends the rules, and requests 5A at 5.2V from the PD
By
N0YWB
·
#13815
·
|
Re: Botspot Windows 11 on Pi
I installed bvm on a 8GB PI5 and had good luck. Running VARA on WINE will exit on transmit on the PI OS. VARA runs great on bvm. I also tried APRSIS32 and Winlink, they work great. Need to do more
By
Denis
·
#13814
·
|
Re: Botspot Windows 11 on Pi
I just did some testing with the BVM. It is not bad at all. It does run decently. A couple of issues * I normally use xrdp to remote into my Pi's. ?I found it more stable than VNC, but with BVM
By
Curt - KC9CTP
·
#13813
·
Edited
|
Re: pi4/5 power supply
I use this with a cig lighter socket and battery and DC supply via Low Loss PWRgate by KI0BK (Flint Hills Radio, Olathe, KS). https://www.amazon.com/dp/B0CBBX79DZ?ref=ppx_yo2ov_dt_b_fed_asin_title
By
Michael Robinson
·
#13812
·
|
Botspot Windows 11 on Pi
I just discovered this effort: https://github.com/Botspot/bvm If this works, it could be a great way to avoid the Wine headaches on ARM architectures like the Pi, allowing use of Vara, Winlink
By
Steve Johnson
·
#13811
·
|
Re: Rigctld no worky
Noticed a difference in TCP port number between LM and 73 Linux Pi build.? Do you fix Rigctl in Direwolf? Perhaps an incorrect port setting in FLrig?? KM6QAQ 73 Sent from AOL on Android On Mon, Apr
By
Jeremy Pierce
·
#13810
·
|
Re: Rigctld no worky
Problem got better - when starting packet modem RIGCTL flashed green then went red. Still don't read frequency from radio. FLrig was turned on and is working. KM6QAQ 73 Sent from AOL on Android On
By
Jeremy Pierce
·
#13809
·
|
Re: Rigctld no worky
Dominic, I boot up, run FLrig, Run PAT Winlink.? Select either packet or VARA FM (same result).? Up pops the web based PAT Winlink page.? Doesn't read the frequency like it does on Linux Mint nor
By
Jeremy Pierce
·
#13808
·
|
Re: Rigctld no worky
Jason, I'm curious what you mean by the term REPO.? I did a format on my sd card, 64 bit debian build with Bookworm, and fresh 73 Linux install.? WINE doesn't install unless you do it under Pi
By
Jeremy Pierce
·
#13807
·
|
Linux73 doesn¡¯t install
I tried to install 73Linux on a WoWe computer with Linux mint installed. First time the menu to enter my call sign. Second time it did I tried to choose a few things. And it ever installed. I guess
By
Macmike <macmikeal@...>
·
#13806
·
|