That got it thanks. All working together. Still don¡¯t have it posting Gridsquare to Conky but I just can run cgps command and it¡¯s available.?
Enjoying the Build a Pi ?and learning!
Thanks again,
Paul?
toggle quoted message
Show quoted text
On Sep 12, 2021, at 7:31 AM, km4ack <jason.oleham@...> wrote:
?
Hi,
I¡¯m new to the raspberry 4 and build a pi. I have most everything working bit grid square on Conky. The GPS works off the IC-705 only by itself, this was confirmed by gpsd check. If it¡¯s running I can¡¯t operate FLRIG or VNC. I have to turn off the 705 reboot raspberry then turn on 705 after the raspberry is on, then GPS no longer works and FLRIG and VNC operate fine.
this group has helped immensely getting up and running, Can someone point me in the right direction to solve this problem. Thanks!
By running:
ls /dev/serial/by-id/you will find there are two listings for the 705 which are something similar to:
usb-Icom_Inc._IC-705_IC-705_12007996-if00
usb-Icom_Inc._IC-705_IC-705_12007996-if02
The one that ends in "if00" is the one that should be used in FLRIG and the one that ends in "if02" should be used for the GPS connection. This will avoid the conflict. First use the GPS update tool and set the GPS to the one ending in "if02" and then configure FLRIG to use the other one and you should be good.
--
73, de KM4ACK
|
|
