Vaughan Dodd

#226

Hello everyone.

I have joined this list after this morning upgraded my Kurzweil 1000. It
has been several years since I used this application.

Between my last use of K1000 and now, I have installed an Index Everest
embosser.

In setting up the properties for K1000 to properly print to this, I notice
three choices for correctly forcing new pages. Form feed, vertical tab and
skip lines. 

K1000's default are 40 characters per line, 25 lines per page. These can be
adjusted. There are no settings for binding space and number of blank lines
at the top of each page and page number position  so I presume the embosser
just looks after those. 

The setup is Windows 11, and I use the supplied Index driver which is
networked.

Experimenting of course, but if others have found the configuration which
works - I'd be pleased to learn about it.

Thanks.

Vaughan.




Vaughan Dodd

Vdodd001@...

+6421 784 856

#227

Very confusingly, the Kurzweil 1000 software, and the Kurzweil K1000 to K1200 line of musical synthesizers have very little in common. So it's not very likely anyone here can help you.

Show quoted text

On Sat, Feb 3, 2024 at 6:29?AM Vaughan Dodd <vdodd001@...> wrote:

Hello everyone.

I have joined this list after this morning upgraded my Kurzweil 1000. It
has been several years since I used this application.

Between my last use of K1000 and now, I have installed an Index Everest
embosser.

In setting up the properties for K1000 to properly print to this, I notice
three choices for correctly forcing new pages. Form feed, vertical tab and
skip lines.

K1000's default are 40 characters per line, 25 lines per page. These can be
adjusted. There are no settings for binding space and number of blank lines
at the top of each page and page number position? so I presume the embosser
just looks after those.

The setup is Windows 11, and I use the supplied Index driver which is
networked.

Experimenting of course, but if others have found the configuration which
works - I'd be pleased to learn about it.

Thanks.

Vaughan.

Vaughan Dodd

Vdodd001@...

+6421 784 856

#228

This is a product naming error Kurzweil made. (I wish they hadn't done that)
Unfortunately, I don't know where to refer you to anymore, because some of
the mailing lists devoted to helping out blind and VI folks have gone dark.
If you find one that's devoted to helping us out, please let us know where
it is.
Nicole

Show quoted text

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
Vaughan Dodd
Sent: Friday, February 02, 2024 8:23 PM
To: [email protected]
Subject: [K1000-K1200] Embossing from K1000

Hello everyone.

I have joined this list after this morning upgraded my Kurzweil 1000. It has
been several years since I used this application.

Between my last use of K1000 and now, I have installed an Index Everest
embosser.

In setting up the properties for K1000 to properly print to this, I notice
three choices for correctly forcing new pages. Form feed, vertical tab and
skip lines. 

K1000's default are 40 characters per line, 25 lines per page. These can be
adjusted. There are no settings for binding space and number of blank lines
at the top of each page and page number position  so I presume the embosser
just looks after those. 

The setup is Windows 11, and I use the supplied Index driver which is
networked.

Experimenting of course, but if others have found the configuration which
works - I'd be pleased to learn about it.

Thanks.

Vaughan.

Vaughan Dodd

Vdodd001@...

+6421 784 856

Vaughan Dodd

#229

开云体育

Thanks for this.

?

Sorry if I have contributed to the confusion you refer to here.

?

Maybe this is not my list?

?

All the best.

?

Vaughan.

?

Show quoted text

From: [email protected] <[email protected]> On Behalf Of Lennart Regebro
Sent: Saturday, February 3, 2024 9:50 PM
To: [email protected]
Subject: Re: [K1000-K1200] Embossing from K1000

?

Very confusingly, the Kurzweil 1000 software, and the Kurzweil K1000 to K1200 line of musical synthesizers have very little in common. So it's not very likely anyone here can help you.

?

On Sat, Feb 3, 2024 at 6:29?AM Vaughan Dodd <vdodd001@...> wrote:

Hello everyone.

I have joined this list after this morning upgraded my Kurzweil 1000. It
has been several years since I used this application.

Between my last use of K1000 and now, I have installed an Index Everest
embosser.

In setting up the properties for K1000 to properly print to this, I notice
three choices for correctly forcing new pages. Form feed, vertical tab and
skip lines.

K1000's default are 40 characters per line, 25 lines per page. These can be
adjusted. There are no settings for binding space and number of blank lines
at the top of each page and page number position? so I presume the embosser
just looks after those.

The setup is Windows 11, and I use the supplied Index driver which is
networked.

Experimenting of course, but if others have found the configuration which
works - I'd be pleased to learn about it.

Thanks.

Vaughan.

Vaughan Dodd

Vdodd001@...

+6421 784 856

Vaughan Dodd

#230

Thank you Nicole and others.

I'll make enquiries.

All the best.

Vaughan.

Show quoted text

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Nicole
Massey
Sent: Sunday, February 4, 2024 3:10 AM
To: [email protected]
Subject: Re: [K1000-K1200] Embossing from K1000

This is a product naming error Kurzweil made. (I wish they hadn't done
that) Unfortunately, I don't know where to refer you to anymore, because
some of the mailing lists devoted to helping out blind and VI folks have
gone dark.
If you find one that's devoted to helping us out, please let us know where
it is.
Nicole

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
Vaughan Dodd
Sent: Friday, February 02, 2024 8:23 PM
To: [email protected]
Subject: [K1000-K1200] Embossing from K1000

Hello everyone.

I have joined this list after this morning upgraded my Kurzweil 1000. It
has been several years since I used this application.

Between my last use of K1000 and now, I have installed an Index Everest
embosser.

In setting up the properties for K1000 to properly print to this, I notice
three choices for correctly forcing new pages. Form feed, vertical tab and
skip lines. 

K1000's default are 40 characters per line, 25 lines per page. These can be
adjusted. There are no settings for binding space and number of blank lines
at the top of each page and page number position  so I presume the embosser
just looks after those. 

The setup is Windows 11, and I use the supplied Index driver which is
networked.

Experimenting of course, but if others have found the configuration which
works - I'd be pleased to learn about it.

Thanks.

Vaughan.

Vaughan Dodd

Vdodd001@...

+6421 784 856