Keyboard Shortcuts
Likes
Search
1978 LGT125 42" cutting deck
|
Bob
You can try They might have the part or info you need. Also in the Database and Links section there are several dealers that have some parts for these old tractors. But if someone can give to info on the spring itself, you might be able to buy 1 from a industrial hardware store Also I uploaded the parts manual for the 42 inch Homelite mowing deck, might be the same /g/JacobsenFordGardenTractors/files/Homelite%2042%20inch%20Rotary%20Mower%20UT%2036037%20Parts%20Manual/Homelite%2042%20inch%20Rotary%20Mower%20UT%2036037%20Parts%20Manual.pdf? Joe |
|
The original Jacobsen idler pulley part number was 154796, and the spring was 352120. Those were for a 42 inch deck #59834. I have the original manuals for the Hydro GT 12 and 14.?
toggle quoted message
Show quoted text
Steve W 01527
|
开云体育Bob, like most Jac wear parts, these have been unobtainum for many years. ?The original design was not good as the spring rubbed on the deck until it wore through. ?I will forward an email I posted in 2010 about a work-around improvement I made while restoring a 42” deck.? I do have an NOS spring, but I overpaid for it; this solution would be cheaper. ? kemajic in MT 1983 GT16H 1982 GT12H (Upgraded with K341) 1980 GT14H (Hibernating) ? ? From: [email protected] <[email protected]>
On Behalf Of Bob Weir
Sent: Wednesday, July 14, 2021 7:13 AM To: [email protected] Subject: [JacobsenFordGardenTractors] 1978 LGT125 42" cutting deck ? does any one have any info on the spring for the tensioner pulley?? Source/part #/spec/size? |
|
Bob Weir
开云体育Steve, ? Thanks and I think it is the same cutting deck. Did not know, Textron, a major defense contractor was involved in cutting decks! ? Bob Weir Sr. Project Engineer ATR Sales, Inc. P(508)393-8529 F(508)393-7766 C(508)397-9723 ? “When injustice becomes law, rebellion becomes duty” ~ Thomas Jefferson ? From: [email protected] [mailto:[email protected]]
On Behalf Of Stephen Walinsky via groups.io
Sent: Wednesday, July 14, 2021 1:17 PM To: [email protected]; mrfixit82852 via groups.io Subject: Re: [JacobsenFordGardenTractors] 1978 LGT125 42" cutting deck ? The original Jacobsen idler pulley part number was 154796, and the spring was 352120. Those were for a 42 inch deck #59834. I have the original manuals for the Hydro GT 12 and 14.? ? Steve W 01527
-- Bullseye Bob |
|
Ken, If you post a picture of the spring and indicate all specs, wire diameter, # of coils, ends, overall length, etc, the spring may be obtainable from a place that sells springs. Ralph Lipeles
On Thursday, July 15, 2021, 11:03:14 AM EDT, Bob Weir <bob@...> wrote:
Steve, ? Thanks and I think it is the same cutting deck. Did not know, Textron, a major defense contractor was involved in cutting decks! ? Bob Weir Sr. Project Engineer ATR Sales, Inc. P(508)393-8529 F(508)393-7766 C(508)397-9723 ? “When injustice becomes law, rebellion becomes duty” ~ Thomas Jefferson ? From: [email protected] [mailto:[email protected]]
On Behalf Of Stephen Walinsky via groups.io
Sent: Wednesday, July 14, 2021 1:17 PM To: [email protected]; mrfixit82852 via groups.io Subject: Re: [JacobsenFordGardenTractors] 1978 LGT125 42" cutting deck ? The original Jacobsen idler pulley part number was 154796, and the spring was 352120. Those were for a 42 inch deck #59834. I have the original manuals for the Hydro GT 12 and 14.? ? Steve W 01527
-- Bullseye Bob |
开云体育Ralph, isn’t all that information in the email I sent? ? kemajic in MT 1983 GT16H 1982 GT12H (Upgraded with K341) 1980 GT14H (Hibernating) ? ? From: [email protected] <[email protected]>
On Behalf Of Ralph
Sent: Thursday, July 15, 2021 9:10 AM To: [email protected] Subject: Re: [JacobsenFordGardenTractors] 1978 LGT125 42" cutting deck ? Ken, ? If you post a picture of the spring and indicate all specs, wire diameter, # of coils, ends, overall length, etc, the spring may be obtainable from a place that sells springs. ? Ralph Lipeles ? On Thursday, July 15, 2021, 11:03:14 AM EDT, Bob Weir <bob@...> wrote: ? ? Steve, ? Thanks and I think it is the same cutting deck. Did not know, Textron, a major defense contractor was involved in cutting decks! ? Bob Weir Sr. Project Engineer ATR Sales, Inc. P(508)393-8529 F(508)393-7766 C(508)397-9723 ? “When injustice becomes law, rebellion becomes duty” ~ Thomas Jefferson ? From:
[email protected] [mailto:[email protected]]
On Behalf Of Stephen Walinsky via groups.io ? The original Jacobsen idler pulley part number was 154796, and the spring was 352120. Those were for a 42 inch deck #59834. I have the original manuals for the Hydro GT 12 and 14.? ? Steve W 01527
|
|
I did not see details about the spring, only a note that said you had an NOS spring. Ralph Lipeles
On Thursday, July 15, 2021, 08:10:24 PM EDT, Kenneth Kem <kmkem@...> wrote:
Ralph, isn’t all that information in the email I sent? ? kemajic in MT 1983 GT16H 1982 GT12H (Upgraded with K341) 1980 GT14H (Hibernating) ? ? From: [email protected] <[email protected]>
On Behalf Of Ralph
Sent: Thursday, July 15, 2021 9:10 AM To: [email protected] Subject: Re: [JacobsenFordGardenTractors] 1978 LGT125 42" cutting deck ? Ken, ? If you post a picture of the spring and indicate all specs, wire diameter, # of coils, ends, overall length, etc, the spring may be obtainable from a place that sells springs. ? Ralph Lipeles ? On Thursday, July 15, 2021, 11:03:14 AM EDT, Bob Weir <bob@...> wrote: ? ? Steve, ? Thanks and I think it is the same cutting deck. Did not know, Textron, a major defense contractor was involved in cutting decks! ? Bob Weir Sr. Project Engineer ATR Sales, Inc. P(508)393-8529 F(508)393-7766 C(508)397-9723 ? “When injustice becomes law, rebellion becomes duty” ~ Thomas Jefferson ? From:
[email protected] [mailto:[email protected]]
On Behalf Of Stephen Walinsky via groups.io ? The original Jacobsen idler pulley part number was 154796, and the spring was 352120. Those were for a 42 inch deck #59834. I have the original manuals for the Hydro GT 12 and 14.? ? Steve W 01527
|
mrfixit82852