USB Connected- NoAudio
|
Ours do not behave this way. We regularly test with the UXB cable attach, but monitor the JackAl audio out. Did you cut the trace on the bottom of the Teensy? Jack, W8TEE
On Tuesday, March 26, 2019, 11:10:31 AM EDT, Rick Price <rickprice48@...> wrote:
Jack, JAckAlV095 Another bug that you are probably already aware of but thought I would pass it by you.? Discovered it while using the debug monitor. With the USB connected to the computer the JackAl audio will turn off except as noted below with these filter settings. SSB Filter- audio on only with filter NONE selected CW Filter- audio on with filter 150, 300, 400, NONE.? Audio off with 600, CUST Could not figure out why when I plugged in the USB the JackAl audio quit until I accidently selected NONE on the filter. Second Teensy audio board does the same thing.? The ubitx audio out was unaffected with the USB plugged in. I was trying to troubleshoot because I eventually want to use CAT with FT8/WSJT-X, USB plugged in all the time. Rick KN4AIE? |
|
Yours is the first report of the filters not working. We'll take a look, but since our are working, about the best we can do is guess what might go wrong. Jack, W8TEE
On Tuesday, March 26, 2019, 4:57:03 PM EDT, Rick Price <rickprice48@...> wrote:
The trace has been cut since day one. I also have problems
with the notch filter not working.? When I select it the notch screen comes
up but neither rotary has any effect on the notch. Maybe there is an issue in
compiling the sketch although the one or two warnings I receive are what others
report and what you have explained prior. This is a mystery! This is also a new
teensy?and audio adapter (3rd pair, first set just stopped working
altogether, thought there might be a problem with the 2nd set so ordered a 3rd
set, getting a little expensive.)? I'll try retry the old teensy and flip
flop audio adapters and see what happens and report back.
Glad yours don't behave that way so there must be something in
mine causing it.? Wonder if you could publish a list of features not
working or with bugs might help with the chasing of rabbits down non-existent
holes. Thanks for the reply.
?
Rick KN4AIE From: [email protected] [mailto:[email protected]] On Behalf Of jjpurdum via Groups.Io Sent: Tuesday, March 26, 2019 4:37 PM To: [email protected] Subject: Re: [JackAl] USB Connected- NoAudio Ours do not behave this way. We regularly test with the UXB cable attach,
but monitor the JackAl audio out. Did you cut the trace on the bottom of the
Teensy?
Jack, W8TEE
On Tuesday, March 26, 2019, 11:10:31 AM EDT, Rick Price
<rickprice48@...> wrote:
Jack, JAckAlV095 Another bug that you are probably already aware of but thought I would pass it by you.? Discovered it while using the debug monitor. With the USB connected to the computer the JackAl audio will turn off except as noted below with these filter settings. SSB Filter- audio on only with filter NONE selected CW Filter- audio on with filter 150, 300, 400, NONE.? Audio off with 600, CUST Could not figure out why when I plugged in the USB the JackAl audio quit until I accidently selected NONE on the filter. Second Teensy audio board does the same thing.? The ubitx audio out was unaffected with the USB plugged in. I was trying to troubleshoot because I eventually want to use CAT with FT8/WSJT-X, USB plugged in all the time. Rick KN4AIE? |
jjpurdum