#1233

Does anyone have firmware they have actually tested on a V5 Ubitx ?

Looking at the v096 firmware I downloaded from this group I note the following..

unsigned long usbCarrier? =? 11996270;

and also...

#define BFOFREQUENCY? ? ? ? ? ? 11997100UL

... which seems to suggest the firmware is setup for a 12MHz filter which is applicable to the V4 and earlier. However the V5 and later uses a 11.059M filter as per specs and code..

.. look at the schematic at the bottom of the page and not the diagram at the top..

... from which we find ...

#define INIT_USB_FREQ (11059200l)

I assume as this has been tested with the V5 at some point according to previous posts someone has an updated version for the firmware ?

Thanks!

Best regards, Peter.

#1234

I'm pretty sure the V4 was the current release when the JackAl came out.?

I'm note sure if any updates for the V5 have been added.?

Brian, N8BDB?

Show quoted text

On Sun, Nov 7, 2021 at 4:16 PM Peter McCracken <peter.mccracken@...> wrote:

Does anyone have firmware they have actually tested on a V5 Ubitx ?

Looking at the v096 firmware I downloaded from this group I note the following..

unsigned long usbCarrier? =? 11996270;

and also...

#define BFOFREQUENCY? ? ? ? ? ? 11997100UL

... which seems to suggest the firmware is setup for a 12MHz filter which is applicable to the V4 and earlier. However the V5 and later uses a 11.059M filter as per specs and code..

.. look at the schematic at the bottom of the page and not the diagram at the top..

... from which we find ...

#define INIT_USB_FREQ (11059200l)

I assume as this has been tested with the V5 at some point according to previous posts someone has an updated version for the firmware ?

Thanks!

Best regards, Peter.

--
Brian - N8BDB

#1235

开云体育

No there have not been updates.? The IF has changed now to…

?

Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ

?

Owner - Operator

Big Signal Ranch – K9ZC

Staunton, Illinois

?

Owner – Operator

Villa Grand Piton – J68HZ

Soufriere, St. Lucia W.I.

Rent it:

Like us on Facebook!

?

Moderator – North American QRO Group at Groups.IO.

?

email:? bill@...

?

Show quoted text

From: [email protected] <[email protected]> On Behalf Of Brian Bowling
Sent: Sunday, November 7, 2021 4:45 PM
To: [email protected]
Subject: Re: [JackAl] uBitx V5 JackAL Firmware

?

I'm pretty sure the V4 was the current release when the JackAl came out.?

?

I'm note sure if any updates for the V5 have been added.?

?

Brian, N8BDB?

?

On Sun, Nov 7, 2021 at 4:16 PM Peter McCracken <peter.mccracken@...> wrote:

Does anyone have firmware they have actually tested on a V5 Ubitx ?

Looking at the v096 firmware I downloaded from this group I note the following..

unsigned long usbCarrier? =? 11996270;

and also...

#define BFOFREQUENCY? ? ? ? ? ? 11997100UL

... which seems to suggest the firmware is setup for a 12MHz filter which is applicable to the V4 and earlier. However the V5 and later uses a 11.059M filter as per specs and code..

.. look at the schematic at the bottom of the page and not the diagram at the top..

... from which we find ...

#define INIT_USB_FREQ (11059200l)

I assume as this has been tested with the V5 at some point according to previous posts someone has an updated version for the firmware ?

Thanks!

Best regards, Peter.

--
Brian - N8BDB

Virus-free.

#1236

The latest release I have for the JackAl code is attached as a ZIP file.

Jack, W8TEE

On Sunday, November 7, 2021, 05:45:36 PM EST, Brian Bowling <bowlingb@...> wrote:

I'm pretty sure the V4 was the current release when the JackAl came out.?

I'm note sure if any updates for the V5 have been added.?

Brian, N8BDB?

Show quoted text

On Sun, Nov 7, 2021 at 4:16 PM Peter McCracken <peter.mccracken@...> wrote:

Does anyone have firmware they have actually tested on a V5 Ubitx ?

Looking at the v096 firmware I downloaded from this group I note the following..

unsigned long usbCarrier? =? 11996270;

and also...

#define BFOFREQUENCY? ? ? ? ? ? 11997100UL

... which seems to suggest the firmware is setup for a 12MHz filter which is applicable to the V4 and earlier. However the V5 and later uses a 11.059M filter as per specs and code..

.. look at the schematic at the bottom of the page and not the diagram at the top..

... from which we find ...

#define INIT_USB_FREQ (11059200l)

I assume as this has been tested with the V5 at some point according to previous posts someone has an updated version for the firmware ?

Thanks!

Best regards, Peter.

--
Brian - N8BDB

JackAlV096.7z