开云体育

You should just be able to flash a micro-SD card (16GB or larger) with the HamIQ image using Balena Etcher, insert it into the Quadra, and plug in your monitor, keyboard, mouse and the power

It arrived, I have no idea what to do now, anyone have instructions? I plan on getting a Wireless keyboard & mouse. No idea what to do, but willing to learn. Help ? Paul K2DB

Sadly, events have occurred that have forced me to set some ground rules so that Inovato-Quadra-4-HamRadio stays a safe and fun place for all members: I have added the text below to the group

Both WSJT-X and GridTracker are CPU-hungry programs. I'd recommend two things: 1. Try running "htop" instead of a window while running those two programs and see CPU load. 2. Try running without

I run? a HamIQ ,G90 /FLrig/ Wsjt-X /Grid- Tracker combo that I really enjoy. (Thanks Dave and Mike !) Problem is when Grid tracker kicks in my mouse freezes until I complete xmitt cycle. Power supply

while I was working on something else it popped into my mind that after things are all setup and running it may be wise to point swap to a sdcard to keep wear off the EMMC I have not seen them hit

Hi Dave, Thanks for putting this group together! New Quadra User Here - and I will be using this amazing low-cost little device for WSJTX with my QDX Radio. I look forward to lots of useful

On HamIQ, simple to roll back... There's a WSJT-X update script included in $HOME/bin From a terminal prompt, type: cd bin nano update_wsjtx_from_src Update these two variables (I know it looks

hey Dave yes running HamIQ and am having issues with WSJTX not keying Flrig consistantly (40-60% fail rate) using CM-108 GPIO keying JS8CALL and FLdigi work 100% so wanted to roll back to a stable

Not witchcraft... Technology! Are you using HamIQ? I can help with that. Even if you aren't using HamIQ, I can still help with that. Please advise, and 73,

what witchcraft was used to install?WSJT-X 2.6.0-rc4 ? i wanted to roll back to 2.5 as I am having some wsjtx > Flrig keying issues so I removed rc4 and when trying to install 2.5 the familiar

unless you are using a braille display # sudo apt remove brltty it seems to mess with trying to keep USB devices connected also have found the USB ports on the Quadra to be lacking in current handling

Hi Dave, I D/L'd the original img from Sourceforge a few days ago. I may be way behind the curve. I tried three times to install it and had no luck. I am going to purge the IQ and try again with the

I only know Jason KM4ACK BAP and Dierwolf.conf is in /home/pi. I see nothing like that. 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink: va7dgp@...

Don, I have not messed with packet on this device yet should it not be trying to use Direwolf? as you would need a direwolf.conf setup up as the modem I managed to get all my Xssh forwarding all

I notice a left-out Grid Location. I manually added it. SEE the error below from 127.0.0.1:8080 2022/11/14 11:14:44 Starting HTTP service (http://localhost:8080)...2022/11/14 11:16:26 Downloading

I did pat configure right from the beginning FLrig does talk to the radio. However, it does not talk to programs like JS8Call using FLrig FLrig. The audio (Pulse) has to be modified each time to show

your on the right path Don but you would still need to run the config tool? "pat config" to edit the file I have not had a chance to that yet as I am just emerging from serial hell had a USB to

Ardop didn't work for me with adding /usr/local/bin to pat menu2 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink: va7dgp@... <va7dgp@...>Subject://wl2k ALLSTAR

/usr/local/bin/ I added this Pat Menu. I've gotten Packet to sort of work. The Wl2k Jnos file I'm not sure where it would be hiding. Flrig and Grid location not talking to pull in local Winlink