开云体育

The developer originally had X11VNV running. I had to manually turn on the X11VNC at each reboot. https://forum.inovato.com/post/remote-desktop-connection-options-vnc-nomachine-12458680?pid=1333665519

Thanks for all your help and tips. What do you think caused the device to brick and when you mean brick could it just mean the power plug broke at a solder connection on the board vs some electrical

The image is a bit by bit copy from the original disk. This includes the formatting, partition table (which defines the size of the partition table), the various data structures the operating system

Up and running with HamPi installed. Any hints on installing RealVNC. I don’t want to use another when it’s on everything else. -- Don W6CZ DM07bk

Hi Andrew, I am not sure if there is a size limitation for the SD card. I have tested up to 265 GB SD card and it worked fine. I have tested 128, 64 (which I prefer to use) and 32 GB SD Cards. The

No problem, all of this is new to me and waiting on the device and plan on using a 128GB microSD card. You original post gave me a concern over if I am using too large of card and what size would be

Hi Andrew, ????? Formatting the drive before imaging it would kinda be useless since any existing formatting or partitioning is destroyed during the imaging process.? But I do have an update on

Not having any experience with this subject (yet), couldn’t you first format and partition the MicroSD card using a PC/Mac then flash the image to it? If not, maybe just create another partition as

Another question; do I insert the card after or before connecting the power etc? Cheers, Tryg --

Great stuff Dave, I have already downloaded it from Sourceforge. I will continue with your instructions. Thanks a lot for the quick response. 73, Tryg --

Hi Folks, Has anyone tried, had any issues or been able to resize the partition of the Quadra image. I have burned the image to a 64 GB micro-SD card and was attempting to expand the partition to use

You're not downloading the image from GitHub. You want to download the image from SourceForge. (GitHub doesn't host files of this size, but SourceForge does.) Find the image here:

Hi Tryg, The image I provided for HamPi for Inovato Quadra -- which I am now going to rebrand as "HamIQ", will run directly off the card that you insert. If you want, you can flash the image to the

And, I have downloaded the .img file, so is it just a matter of putting it on a card with Etcher and after insertion, just power up? With the greatest of respect and gratitude, I really need to be

Congratulations on being on the bleeding edge of a new platform! I heard about it from you first. That 90K is amazing. -- Don W6CZ DM07bk

This should be fun! Always fun to be an early adopter ? -- Don W6CZ DM07bk

I have been running Build a Pi from Jason KM4ACK. It won't run Vara but I've been running JS8Call etc. I'm having issues with Ardop but that could be Op Error on my part. I've put Quadra on the side

/g/Inovato-Quadra-4-HamRadio/message/2 ( /g/Inovato-Quadra-4-HamRadio/message/2 ) has your download details for the image file tar.gz for etcher.

The Quadra arrived this morning. It is a late breakfast for me and want to get stuck into the install after a few coffees. I am going to download the image now just as a backup. The idea of using the

Hello to all, I have downloaded the software I am just waiting for the hardware. I really hope that this will all work out ok. I do have a question for anyone that has already tried it all out and