HP8924-Family-Spectrum-Analyzers@groups.io

Ron _ All Messages By This Member #1199 I have a HP8924C from Amtronix that has been in storage for awhile.? When I attempted to power on, it doesn't.? Could be the power supply, maybe not.? Unfortunately, my test bench and repair/diagnostic equipment are in storage and I don't have a troubleshooting space.? Is there anyone close to Huntsville, AL, Nashville, TN, or Bowling Green, KY that can do reasonably priced repairs on this unit?
VE6WMR All Messages By This Member #1200 Auburn Metrology is in Bowling Green, KY.
Wallace Gasiewicz All Messages By This Member #1201 I had the same sort of problem with an 8935.? I used some contact cleaner on the on/off switch and the thing same on after several tries..... On Thursday, April 17, 2025, 11:09:14 PM UTC, VE6WMR via groups.io <akuzych@...> wrote: Auburn Metrology is in Bowling Green, KY.
[email protected] All Messages By This Member #1205 If you bought it from Amtronix, remove the power supply and send it to Amtronix and they will send you a refurbished PS at no charge.
[email protected] All Messages By This Member #1206 If your HP 8924C will not turn on, It's almost always the power supply at fault. The on/off switch opens to turn the unit on (not closes like almost everything else). If the on/off switch were bad, the 8924C will stay on all the time. Rick

开云体育