|
Hello group,
I am in need of a HP 5086-7592 Yig oscillator.? I have found many on Ebay but figure with the nature of these things I could end up with a part no better than what I have.? Any advice would be greatly appreciated.
Thank you,
Jon
|
I have a couple of HP and several avantek units. ?I’ll check the on in the morning Regards, ? Stephen Hanselman Datagate Systems, LLC 3107 North Deer Run Road #24 Carson City, Nevada, 89701 (775) 882-5117?office (775) 720-6020?mobile s.hanselman@...
a Service Disabled, Veteran Owned Small Business DISCLAIMER: This e-mail and any attachments are intended only for use by the addressee(s) named herein and may contain legally privileged and/or proprietary information. If you are not the intended recipient, any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you have received this e-mail in error, please immediately notify me and permanently delete the original and all copies and printouts of this e-mail and any attachments.
toggle quoted message
Show quoted text
On Mar 21, 2019, at 20:33, rpoz28cam via Groups.Io < rpoz28cam@...> wrote: Hello group,
I am in need of a HP 5086-7592 Yig oscillator.? I have found many on Ebay but figure with the nature of these things I could end up with a part no better than what I have.? Any advice would be greatly appreciated.
Thank you,
Jon
|
Hello,? Stephen that would be great. ?Thank you! Sent from my 20" Texas sized?
toggle quoted message
Show quoted text
On Mar 22, 2019, at 1:29 AM, Stephen Hanselman < kc4sw.io@...> wrote: I have a couple of HP and several avantek units. ?I’ll check the on in the morning Regards, ? Stephen Hanselman Datagate Systems, LLC 3107 North Deer Run Road #24 Carson City, Nevada, 89701 (775) 882-5117?office (775) 720-6020?mobile s.hanselman@...
a Service Disabled, Veteran Owned Small Business DISCLAIMER: This e-mail and any attachments are intended only for use by the addressee(s) named herein and may contain legally privileged and/or proprietary information. If you are not the intended recipient, any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you have received this e-mail in error, please immediately notify me and permanently delete the original and all copies and printouts of this e-mail and any attachments.
On Mar 21, 2019, at 20:33, rpoz28cam via Groups.Io < rpoz28cam@...> wrote: Hello group,
I am in need of a HP 5086-7592 Yig oscillator.? I have found many on Ebay but figure with the nature of these things I could end up with a part no better than what I have.? Any advice would be greatly appreciated.
Thank you,
Jon
|
Jon, ? I only have one good HP 5086-7080 2.05->3.55GHz Sorry, ? Steve ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of rpoz28cam via Groups.Io Sent: Friday, March 22, 2019 6:42 AM To: [email protected]Subject: Re: [HP-Agilent-Keysight-equipment] YTO Needed ? Hello,? Stephen that would be great. ?Thank you! Sent from my 20" Texas sized?
On Mar 22, 2019, at 1:29 AM, Stephen Hanselman <kc4sw.io@...> wrote:
I have a couple of HP and several avantek units. ?I’ll check the on in the morning Regards, ? Stephen Hanselman Datagate Systems, LLC 3107 North Deer Run Road #24 Carson City, Nevada, 89701 (775) 882-5117?office (775) 720-6020?mobile s.hanselman@...
a Service Disabled, Veteran Owned Small Business DISCLAIMER: This e-mail and any attachments are intended only for use by the addressee(s) named herein and may contain legally privileged and/or proprietary information. If you are not the intended recipient, any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you have received this e-mail in error, please immediately notify me and permanently delete the original and all copies and printouts of this e-mail and any attachments.
On Mar 21, 2019, at 20:33, rpoz28cam via Groups.Io <rpoz28cam@...> wrote:
I am in need of a HP 5086-7592 Yig oscillator.? I have found many on Ebay but figure with the nature of these things I could end up with a part no better than what I have.? Any advice would be greatly appreciated.
|
Steve, Is that one fit a 8590A by chance? ?I have another box that has a noisy Yig in it as well. ?I suspect the yig heater isn’t working, it drifts +- several hundred Khz. ?Causing to analyzer to fail the 100Khz band width confidence test.? Let me know & I do appreciate you looking. ?
Thank you,?
Jon Sent from my 20" Texas sized?
toggle quoted message
Show quoted text
On Mar 22, 2019, at 1:30 PM, Stephen Hanselman < kc4sw.io@...> wrote:
Jon, ? I only have one good HP 5086-7080 2.05->3.55GHz Sorry, ? Steve ? ? Hello,? Stephen that would be great. ?Thank you! Sent from my 20" Texas sized?
On Mar 22, 2019, at 1:29 AM, Stephen Hanselman <kc4sw.io@...> wrote:
I have a couple of HP and several avantek units. ?I’ll check the on in the morning Regards, ? Stephen Hanselman Datagate Systems, LLC 3107 North Deer Run Road #24 Carson City, Nevada, 89701 (775) 882-5117?office (775) 720-6020?mobile s.hanselman@...
a Service Disabled, Veteran Owned Small Business DISCLAIMER: This e-mail and any attachments are intended only for use by the addressee(s) named herein and may contain legally privileged and/or proprietary information. If you are not the intended recipient, any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you have received this e-mail in error, please immediately notify me and permanently delete the original and all copies and printouts of this e-mail and any attachments.
On Mar 21, 2019, at 20:33, rpoz28cam via Groups.Io <rpoz28cam@...> wrote:
I am in need of a HP 5086-7592 Yig oscillator.? I have found many on Ebay but figure with the nature of these things I could end up with a part no better than what I have.? Any advice would be greatly appreciated.
|
Not sure about that one, it came out of the 1500MHz plug-in SA hat Fi he HP180 scope Regards, ? Stephen Hanselman Datagate Systems, LLC 3107 North Deer Run Road #24 Carson City, Nevada, 89701 (775) 882-5117?office (775) 720-6020?mobile s.hanselman@...
a Service Disabled, Veteran Owned Small Business DISCLAIMER: This e-mail and any attachments are intended only for use by the addressee(s) named herein and may contain legally privileged and/or proprietary information. If you are not the intended recipient, any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you have received this e-mail in error, please immediately notify me and permanently delete the original and all copies and printouts of this e-mail and any attachments.
toggle quoted message
Show quoted text
On Mar 22, 2019, at 14:14, rpoz28cam via Groups.Io < rpoz28cam@...> wrote: Steve, Is that one fit a 8590A by chance? ?I have another box that has a noisy Yig in it as well. ?I suspect the yig heater isn’t working, it drifts +- several hundred Khz. ?Causing to analyzer to fail the 100Khz band width confidence test.? Let me know & I do appreciate you looking. ?
Thank you,?
Jon Sent from my 20" Texas sized? On Mar 22, 2019, at 1:30 PM, Stephen Hanselman < kc4sw.io@...> wrote:
Jon, ? I only have one good HP 5086-7080 2.05->3.55GHz Sorry, ? Steve ? ? Hello,? Stephen that would be great. ?Thank you! Sent from my 20" Texas sized?
On Mar 22, 2019, at 1:29 AM, Stephen Hanselman <kc4sw.io@...> wrote:
I have a couple of HP and several avantek units. ?I’ll check the on in the morning Regards, ? Stephen Hanselman Datagate Systems, LLC 3107 North Deer Run Road #24 Carson City, Nevada, 89701 (775) 882-5117?office (775) 720-6020?mobile s.hanselman@...
a Service Disabled, Veteran Owned Small Business DISCLAIMER: This e-mail and any attachments are intended only for use by the addressee(s) named herein and may contain legally privileged and/or proprietary information. If you are not the intended recipient, any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you have received this e-mail in error, please immediately notify me and permanently delete the original and all copies and printouts of this e-mail and any attachments.
On Mar 21, 2019, at 20:33, rpoz28cam via Groups.Io <rpoz28cam@...> wrote:
I am in need of a HP 5086-7592 Yig oscillator.? I have found many on Ebay but figure with the nature of these things I could end up with a part no better than what I have.? Any advice would be greatly appreciated.
|
