Looking for some info on a broken cap..........Manual says it is a
selected part, with the ave value given as 5pf mica 10% 500vdcw (from
Hi Q div of Aerovox Corp Olean NY)Hp part no. is 0150-008.
This little pesky varmint looks just like a small resistor (1/8 dia,x
1/8 long)The colors are Blue/gray/white/gold, from what I can figure
from all the old cap charts it should be 68pf or 6.8pf. Before it
broke it measured I think around 9pf ( with it connected across
double bannana jacks)Any clues on its replacement? Since this is in
parallel with the scopes or meters input capacitance, its effect
would seems to be neglegible.
Survey says..............
Dave
