|
If anyone has any available, I'd like to purchase the following knobs. My application is for a 3582A, but they were used on other instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs. It's about 5/16" in diameter.
Anybody gots?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Pictures would be useful - particularly with a ruler or some other reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
toggle quoted message
Show quoted text
If anyone has any available, I'd like to purchase the following knobs. My application is for a 3582A, but they were used on other instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs. It's about 5/16" in diameter.
Anybody gots?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Well the knobs are missing, so..
-Dave
toggle quoted message
Show quoted text
On 9/5/20 6:30 PM, Bruce wrote: Pictures would be useful - particularly with a ruler or some other reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following knobs.? My application is for a 3582A, but they were used on other instruments.
? 0370-2188?? "frequency mode" on the 3582A
? 0370-3013?? "noise source level" on the 3582A
? ...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs.? It's about 5/16" in diameter.
? Anybody gots?
???????????? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy Electronics Lab at
toggle quoted message
Show quoted text
On 2020. 09. 06. 0:34, Dave McGuire wrote:
? Well the knobs are missing, so..
??????????? -Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following knobs.? My application is for a 3582A, but they were used on other instruments.
? 0370-2188?? "frequency mode" on the 3582A
? 0370-3013?? "noise source level" on the 3582A
? ...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs.? It's about 5/16" in diameter.
? Anybody gots?
???????????? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Is there anyone else out there who finds this member¡¯s language objectionable?
DaveD
toggle quoted message
Show quoted text
On Sep 5, 2020, at 19:06, Tam Hanna <tamhan@...> wrote:
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
Well the knobs are missing, so..
-Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following knobs. My application is for a 3582A, but they were used on other instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs. It's about 5/16" in diameter.
Anybody gots?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Inappropriate for the forum, sure, but...it's just a word. Most of us have far bigger worries than that. (if you don't, I envy you!)
-Dave
toggle quoted message
Show quoted text
On 9/5/20 9:05 PM, Dave Daniel wrote: Is there anyone else out there who finds this member¡¯s language objectionable?
DaveD
On Sep 5, 2020, at 19:06, Tam Hanna <tamhan@...> wrote:
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
Well the knobs are missing, so..
-Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following knobs. My application is for a 3582A, but they were used on other instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs. It's about 5/16" in diameter.
Anybody gots?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Thanks Tam, but I've got a bunch of 3D printers here. I'm really looking for original knobs.
-Dave
toggle quoted message
Show quoted text
On 9/5/20 7:06 PM, Tam Hanna wrote: Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
? Well the knobs are missing, so..
??????????? -Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following knobs.? My application is for a 3582A, but they were used on other instruments.
? 0370-2188?? "frequency mode" on the 3582A
? 0370-3013?? "noise source level" on the 3582A
? ...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs.? It's about 5/16" in diameter.
? Anybody gots?
???????????? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Is there anyone else who thinks there is a correlation between soy consumption and finding me objectionable? p.s. To my fellow conservative engineers: I have debated with myself long and wide, if I should respond. I mean, I have better things to do. But if we always, all, have better things to do than engage with Liberals...We should not wonder if we wake up in the CHAZ.
With best regards Tam HANNA (emailing on a BlackBerry PRIV) Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at Am 6. September 2020 03:05:43 MESZ schrieb Dave Daniel <kc0wjn@...>:
toggle quoted message
Show quoted text
Is there anyone else out there who finds this member¡¯s language objectionable?
DaveD
On Sep 5, 2020, at 19:06, Tam Hanna <tamhan@...> wrote:
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
Well the knobs are missing, so..
-Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following knobs. My application is for a 3582A, but they were used on other instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs. It's about 5/16" in diameter.
Anybody gots?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109757): /g/HP-Agilent-Keysight-equipment/message/109757
Mute This Topic: /mt/76658220/102401
Group Owner: [email protected]
Unsubscribe: /g/HP-Agilent-Keysight-equipment/leave/defanged [tamhan@...]
|
I wanted to also offer help in designing the model, if needed. Just finished my OpenSCAD book and get perverse joy from designing these knobs. Over at the LeCroy mailing list, I already sent out like 20.
With best regards Tam HANNA (emailing on a BlackBerry PRIV) Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at Am 6. September 2020 03:09:54 MESZ schrieb Dave McGuire <mcguire@...>:
toggle quoted message
Show quoted text
Thanks Tam, but I've got a bunch of 3D printers here. I'm really
looking for original knobs.
-Dave
On 9/5/20 7:06 PM, Tam Hanna wrote:
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill
work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy
Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
? Well the knobs are missing, so..
??????????? -Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other
reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following
knobs.? My application is for a 3582A, but they were used on other
instruments.
? 0370-2188?? "frequency mode" on the 3582A
? 0370-3013?? "noise source level" on the 3582A
? ...and just the little front cap for an 0370-1005, which is
probably the same as for many other knobs.? It's about 5/16" in
diameter.
? Anybody gots?
???????????? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109759): /g/HP-Agilent-Keysight-equipment/message/109759
Mute This Topic: /mt/76658220/102401
Group Owner: [email protected]
Unsubscribe: /g/HP-Agilent-Keysight-equipment/leave/defanged [tamhan@...]
|
So maybe someone else can help
Quoting Dave McGuire <mcguire@...>:
toggle quoted message
Show quoted text
Well the knobs are missing, so..
-Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other
reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following
knobs.? My application is for a 3582A, but they were used on other
instruments.
? 0370-2188?? "frequency mode" on the 3582A
? 0370-3013?? "noise source level" on the 3582A
? ...and just the little front cap for an 0370-1005, which is
probably the same as for many other knobs.? It's about 5/16" in
diameter.
? Anybody gots?
???????????? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
|
I've also offered my help. Maybe, it is a lost cause. For the LeCroy, I recently designed only off a picture and two measurements. Clearly it can be done. Tam
With best regards Tam HANNA (emailing on a BlackBerry PRIV) Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at Am 6. September 2020 03:46:37 MESZ schrieb Bruce <bruce@...>:
toggle quoted message
Show quoted text
So maybe someone else can help
Quoting Dave McGuire <mcguire@...>:
Well the knobs are missing, so..
-Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other
reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following
knobs.? My application is for a 3582A, but they were used on other
instruments.
? 0370-2188?? "frequency mode" on the 3582A
? 0370-3013?? "noise source level" on the 3582A
? ...and just the little front cap for an 0370-1005, which is
probably the same as for many other knobs.? It's about 5/16" in
diameter.
? Anybody gots?
???????????? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109762): /g/HP-Agilent-Keysight-equipment/message/109762
Mute This Topic: /mt/76658220/102401
Group Owner: [email protected]
Unsubscribe: /g/HP-Agilent-Keysight-equipment/leave/defanged [tamhan@...]
|
On 9/5/20 8:41 PM, Tam Hanna wrote: if we always, all, have better things to do than engage with Liberals...We should not wonder if we wake up in the CHAZ. There is no valid use of the word all. You live in a semi dictator state. We take you with a grain of salt. -- John Griessen -- building lab gear for biologists Albuquerque NM blog.kitmatic.com
|
Ah, I'm a big fan of OpenSCAD. I'd love to see your book, please send details.
I'd entertain some new knobs if no originals turn up. I appreciate the offer.
-Dave
toggle quoted message
Show quoted text
On 9/5/20 9:42 PM, Tam Hanna wrote: I wanted to also offer help in designing the model, if needed. Just finished my OpenSCAD book and get perverse joy from designing these knobs.
Over at the LeCroy mailing list, I already sent out like 20.
------------------------------------------------------------------------
With best regards
Tam HANNA (emailing on a BlackBerry PRIV)
Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at
Am 6. September 2020 03:09:54 MESZ schrieb Dave McGuire <mcguire@...>:
Thanks Tam, but I've got a bunch of 3D printers here. I'm really
looking for original knobs.
-Dave
On 9/5/20 7:06 PM, Tam Hanna wrote:
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics,
and Ill
work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy
Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
? Well the knobs are missing, so..
??????????? -Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or
some other
reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase
the following
knobs.? My application is for a 3582A, but they were
used on other
instruments.
? 0370-2188?? "frequency mode" on the 3582A
? 0370-3013?? "noise source level" on the 3582A
? ...and just the little front cap for an
0370-1005, which is
probably the same as for many other knobs.? It's
about 5/16" in
diameter.
? Anybody gots?
???????????? -Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
------------------------------------------------------------------------
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#109759):/g/HP-Agilent-Keysight-equipment/message/109759
Mute This Topic:/mt/76658220/102401
Group Owner: [email protected]
Unsubscribe:/g/HP-Agilent-Keysight-equipment/leave/defanged [tamhan@...]
------------------------------------------------------------------------
--
Dave McGuire, AK4HZ
New Kensington, PA
|
What I find objectionable is any mention of tRump.
toggle quoted message
Show quoted text
On Sun, 06 Sep 2020 03:41:37 +0200, you wrote: Is there anyone else who thinks there is a correlation between soy consumption and finding me objectionable?
p.s. To my fellow conservative engineers: I have debated with myself long and wide, if I should respond. I mean, I have better things to do. But if we always, all, have better things to do than engage with Liberals...We should not wonder if we wake up in the CHAZ.
---
With best regards
Tam HANNA (emailing on a BlackBerry PRIV)
Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at
Am 6. September 2020 03:05:43 MESZ schrieb Dave Daniel <kc0wjn@...>:
Is there anyone else out there who finds this member¡¯s language
objectionable?
DaveD
On Sep 5, 2020, at 19:06, Tam Hanna <tamhan@...> wrote:
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy
Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
Well the knobs are missing, so..
-Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other
reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following
knobs. My application is for a 3582A, but they were used on other
instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is
probably the same as for many other knobs. It's about 5/16" in
diameter.
Anybody gots?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
|
Ok...F-bombs are one thing; anyone with any connection to the real world hears that word every day. But mention of politics is definitely off base here.
(note that I'm not saying that due to disagreement)
-Dave
toggle quoted message
Show quoted text
On 9/6/20 12:08 AM, Earl Morris wrote: What I find objectionable is any mention of tRump.
On Sun, 06 Sep 2020 03:41:37 +0200, you wrote:
Is there anyone else who thinks there is a correlation between soy consumption and finding me objectionable?
p.s. To my fellow conservative engineers: I have debated with myself long and wide, if I should respond. I mean, I have better things to do. But if we always, all, have better things to do than engage with Liberals...We should not wonder if we wake up in the CHAZ.
---
With best regards
Tam HANNA (emailing on a BlackBerry PRIV)
Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at
Am 6. September 2020 03:05:43 MESZ schrieb Dave Daniel <kc0wjn@...>:
Is there anyone else out there who finds this member¡¯s language
objectionable?
DaveD
On Sep 5, 2020, at 19:06, Tam Hanna <tamhan@...> wrote:
Fuck, Dave, you know the game.
I am already printing knobs for everyone. Send me a few pics, and Ill work my magic for you.
Tam
With best regards
Tam HANNA
Enjoy electronics? Join 15k7 other followers by visiting the Crazy
Electronics Lab at
On 2020. 09. 06. 0:34, Dave McGuire wrote:
Well the knobs are missing, so..
-Dave
On 9/5/20 6:30 PM, Bruce wrote:
Pictures would be useful - particularly with a ruler or some other
reference.
Cheers!
Bruce
Quoting Dave McGuire <mcguire@...>:
If anyone has any available, I'd like to purchase the following
knobs. My application is for a 3582A, but they were used on other
instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is
probably the same as for many other knobs. It's about 5/16" in
diameter.
Anybody gots?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
|
How about we keep the politics, religion, and sports out of the HP/Agilent/Keysight group?
Thanks.
Jim Ford?
Sent from my Verizon, Samsung Galaxy smartphone
toggle quoted message
Show quoted text
-------- Original message -------- From: Earl Morris <earl@...> Date: 9/5/20 9:08 PM (GMT-08:00) Subject: Re: [HP-Agilent-Keysight-equipment] looking for a few knobs
What I find objectionable is any mention of tRump. On Sun, 06 Sep 2020 03:41:37 +0200, you wrote: >Is there anyone else who thinks there is a correlation between soy consumption and finding me objectionable? > > >p.s. To my fellow conservative engineers: I have debated with myself long and wide, if I should respond. I mean, I have better things to do. But if we always, all, have better things to do than engage with Liberals...We should not wonder if we wake up in the CHAZ. >--- >With best regards >Tam HANNA (emailing on a BlackBerry PRIV) > >Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at https://www.instagram.com/tam.hanna/ > >Am 6. September 2020 03:05:43 MESZ schrieb Dave Daniel <kc0wjn@...>: >>Is there anyone else out there who finds this member?s language >>objectionable? >> >>DaveD >> >>> On Sep 5, 2020, at 19:06, Tam Hanna <tamhan@...> wrote: >>> >>> Fuck, Dave, you know the game. >>> >>> >>> I am already printing knobs for everyone. Send me a few pics, and Ill >>work my magic for you. >>> >>> >>> Tam >>> >>> With best regards >>> Tam HANNA >>> >>> Enjoy electronics? Join 15k7 other followers by visiting the Crazy >>Electronics Lab at https://www.instagram.com/tam.hanna/ >>> >>>> On 2020. 09. 06. 0:34, Dave McGuire wrote: >>>> >>>>?? Well the knobs are missing, so.. >>>> >>>>???????????? -Dave >>>> >>>>> On 9/5/20 6:30 PM, Bruce wrote: >>>>> Pictures would be useful - particularly with a ruler or some other >>reference. >>>>> >>>>> Cheers! >>>>> >>>>> Bruce >>>>> >>>>> Quoting Dave McGuire <mcguire@...>: >>>>> >>>>>> If anyone has any available, I'd like to purchase the following >>knobs.? My application is for a 3582A, but they were used on other >>instruments. >>>>>> >>>>>>?? 0370-2188?? "frequency mode" on the 3582A >>>>>>?? 0370-3013?? "noise source level" on the 3582A >>>>>> >>>>>>?? ...and just the little front cap for an 0370-1005, which is >>probably the same as for many other knobs.? It's about 5/16" in >>diameter. >>>>>> >>>>>>?? Anybody gots? >>>>>> >>>>>>????????????? -Dave >>>>>> >>>>>> -- >>>>>> Dave McGuire, AK4HZ >>>>>> New Kensington, PA >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> >> > >
|
And certain language.? I have no sympathy for people who feel the need for that kind of language on public forums.? It shows a lack of vocabulary and education in my book.?
Dave
On Saturday, September 5, 2020, 09:43:15 PM PDT, Jim Ford <james.ford@...> wrote:
How about we keep the politics, religion, and sports out of the HP/Agilent/Keysight group?
Thanks.
Jim Ford?
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message -------- From: Earl Morris <earl@...> Date: 9/5/20 9:08 PM (GMT-08:00) Subject: Re: [HP-Agilent-Keysight-equipment] looking for a few knobs
What I find objectionable is any mention of tRump. On Sun, 06 Sep 2020 03:41:37 +0200, you wrote: >Is there anyone else who thinks there is a correlation between soy consumption and finding me objectionable? > > >p.s. To my fellow conservative engineers: I have debated with myself long and wide, if I should respond. I mean, I have better things to do. But if we always, all, have better things to do than engage with Liberals...We should not wonder if we wake up in the CHAZ. >--- >With best regards >Tam HANNA (emailing on a BlackBerry PRIV) > >Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at https://www.instagram.com/tam.hanna/ > >Am 6. September 2020 03:05:43 MESZ schrieb Dave Daniel <kc0wjn@...>: >>Is there anyone else out there who finds this member¡¯s language >>objectionable? >> >>DaveD >> >>> On Sep 5, 2020, at 19:06, Tam Hanna <tamhan@...> wrote: >>> >>> Fuck, Dave, you know the game. >>> >>> >>> I am already printing knobs for everyone. Send me a few pics, and Ill >>work my magic for you. >>> >>> >>> Tam >>> >>> With best regards >>> Tam HANNA >>> >>> Enjoy electronics? Join 15k7 other followers by visiting the Crazy >>Electronics Lab at https://www.instagram.com/tam.hanna/ >>> >>>> On 2020. 09. 06. 0:34, Dave McGuire wrote: >>>> >>>>?? Well the knobs are missing, so.. >>>> >>>>???????????? -Dave >>>> >>>>> On 9/5/20 6:30 PM, Bruce wrote: >>>>> Pictures would be useful - particularly with a ruler or some other >>reference. >>>>> >>>>> Cheers! >>>>> >>>>> Bruce >>>>> >>>>> Quoting Dave McGuire <mcguire@...>: >>>>> >>>>>> If anyone has any available, I'd like to purchase the following >>knobs.? My application is for a 3582A, but they were used on other >>instruments. >>>>>> >>>>>>?? 0370-2188?? "frequency mode" on the 3582A >>>>>>?? 0370-3013?? "noise source level" on the 3582A >>>>>> >>>>>>?? ...and just the little front cap for an 0370-1005, which is >>probably the same as for many other knobs.? It's about 5/16" in >>diameter. >>>>>> >>>>>>?? Anybody gots? >>>>>> >>>>>>????????????? -Dave >>>>>> >>>>>> -- >>>>>> Dave McGuire, AK4HZ >>>>>> New Kensington, PA >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> >> > >
|
Hello Dave,
I may have these knobs and front cap but I was not able to identify them on a picture of a 3582A , for example here :
Cold you identify them on the picture
Best regards
Eric
toggle quoted message
Show quoted text
Le 06/09/2020 00:26, Dave McGuire a ¨¦crit :
If anyone has any available, I'd like to purchase the following knobs. My application is for a 3582A, but they were used on other instruments.
0370-2188 "frequency mode" on the 3582A
0370-3013 "noise source level" on the 3582A
...and just the little front cap for an 0370-1005, which is probably the same as for many other knobs. It's about 5/16" in diameter.
Anybody gots?
-Dave
|
As long as this grain of salt is 3D printable, and you have a shipping address, I'll gladly print you one.
OpenSCAD is strangely addictive. I even 3D printed my loo roll holder.
Tam
- - - - -
With best regards
Tam HANNA
Enjoy electronics? Join 13500 followers by visiting the Crazy Electronics Lab at
toggle quoted message
Show quoted text
On 06.09.20 04:02, John Griessen wrote: On 9/5/20 8:41 PM, Tam Hanna wrote:
if we always, all, have better things to do than engage with Liberals...We should not wonder if we wake up in the CHAZ. There is no valid use of the word all.? You live in a semi dictator state.? We take you with a grain of salt.
|
Hello,
the book is not finished yet, I just turned in the flag with corrections on Friday.
But, there will be a local launch party of the book (free booze), and we will also live stream it to IG and maybe YouTube if we can get it set up.
So, stay tuned...and thanks for your interest.
Tam
- - - - -
With best regards
Tam HANNA
Enjoy electronics? Join 13500 followers by visiting the Crazy Electronics Lab at
toggle quoted message
Show quoted text
On 06.09.20 04:41, Dave McGuire wrote:
? Ah, I'm a big fan of OpenSCAD.? I'd love to see your book, please send details.
? I'd entertain some new knobs if no originals turn up.? I appreciate the offer.
???????????? -Dave
On 9/5/20 9:42 PM, Tam Hanna wrote:
I wanted to also offer help in designing the model, if needed. Just finished my OpenSCAD book and get perverse joy from designing these knobs.
Over at the LeCroy mailing list, I already sent out like 20.
------------------------------------------------------------------------
With best regards
Tam HANNA (emailing on a BlackBerry PRIV)
Enjoy electronics? Join 14k other followers by visiting the Crazy Electronics Lab at
Am 6. September 2020 03:09:54 MESZ schrieb Dave McGuire <mcguire@...>:
??????? Thanks Tam, but I've got a bunch of 3D printers here. I'm really
??? looking for original knobs.
??????????????????? -Dave
??? On 9/5/20 7:06 PM, Tam Hanna wrote:
??????? Fuck, Dave, you know the game.
??????? I am already printing knobs for everyone. Send me a few pics,
??????? and Ill
??????? work my magic for you.
??????? Tam
??????? With best regards
??????? Tam HANNA
??????? Enjoy electronics? Join 15k7 other followers by visiting the Crazy
??????? Electronics Lab at
??????? On 2020. 09. 06. 0:34, Dave McGuire wrote:
???????????? ? Well the knobs are missing, so..
???????????? ??????????? -Dave
??????????? On 9/5/20 6:30 PM, Bruce wrote:
??????????????? Pictures would be useful - particularly with a ruler or
??????????????? some other
??????????????? reference.
??????????????? Cheers!
??????????????? Bruce
??????????????? Quoting Dave McGuire <mcguire@...>:
??????????????????? If anyone has any available, I'd like to purchase
??????????????????? the following
??????????????????? knobs.? My application is for a 3582A, but they were
??????????????????? used on other
??????????????????? instruments.
???????????????????? ? 0370-2188?? "frequency mode" on the 3582A
???????????????????? ? 0370-3013?? "noise source level" on the 3582A
???????????????????? ? ...and just the little front cap for an
??????????????????? 0370-1005, which is
??????????????????? probably the same as for many other knobs. It's
??????????????????? about 5/16" in
??????????????????? diameter.
???????????????????? ? Anybody gots?
???????????????????? ???????????? -Dave
??????????????????? -- ??????????????????? Dave McGuire, AK4HZ
??????????????????? New Kensington, PA
??? -- ??? Dave McGuire, AK4HZ
??? New Kensington, PA
------------------------------------------------------------------------
??? Groups.io Links: You receive all messages sent to this group.
??? View/Reply Online (#109759):/g/HP-Agilent-Keysight-equipment/message/109759
??? Mute This Topic:/mt/76658220/102401
??? Group Owner: [email protected]
Unsubscribe:/g/HP-Agilent-Keysight-equipment/leave/defanged [tamhan@...]
------------------------------------------------------------------------
|
Dave McGuire