|
Greetings All,
I am a new member of the group and am looking forward to an enjoyable time here.
I have a large inventory of HP boat anchors which I want to dispose of. Some I want to sell as functional units, others might get parted out if there is any market for these parts. There are over 60 units consisting of these models: 130C, 140A, 1900A, 200CD, 214A, 302B, 342A, 400D, 400H, 411A, 415B, 428A, 431B, 5210A, 523C, 606A, 608C, 608D, 612A, 614A, 616A, 618B, 626A, 694A, 851B, 8690A, and probably a few others.
Any suggestions for disposing of this would be appreciated. I also need manuals for most models and there are just too many to buy them. I think that there are downloadable manuals for the equivalent military units but I don't know the military model numbers. Is there a cross reference list available?
Thanks,
Jack
|
Jack
Where are you located?
tnx
Hank WD5JFR
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Friday, May 14, 2004 12:07 AM
Subject: [hp_agilent_equipment]
Introduction
Greetings All,
I am a new member of the group and am
looking forward to an enjoyable
time here.
I have a large inventory
of HP boat anchors which I want to dispose of.
Some I want to sell as
functional units, others might get parted out if
there is any market for
these parts. There are over 60 units consisting
of these models: 130C,
140A, 1900A, 200CD, 214A, 302B, 342A, 400D, 400H,
411A, 415B, 428A, 431B,
5210A, 523C, 606A, 608C, 608D, 612A, 614A, 616A,
618B, 626A, 694A, 851B,
8690A, and probably a few others.
Any suggestions for disposing of this
would be appreciated. I also need
manuals for most models and there are
just too many to buy them. I think
that there are downloadable manuals for
the equivalent military units
but I don't know the military model numbers.
Is there a cross reference
list
available?
Thanks,
Jack
|
Hank WD5JFR wrote: Jack
Where are you located?
tnx I'm in Klamath Falls, Oregon. That is south-central Oregon, 20 miles from the California border and light-years from any recognized civilzation. Jack
|
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Saturday, May 15, 2004 4:30
PM
Subject: [hp_agilent_equipment] Re:
Introduction
Hank WD5JFR wrote:
> Jack
> Where are you
located?
> tnx
I'm in Klamath Falls, Oregon. That is
south-central Oregon, 20 miles
from the California border and light-years
from any recognized civilzation.
Jack
|
Hello Jack.
?
This is Robert.?I have a list of H.P.
Oscilliscopes I am looking for. Perhaps you might have a few of them or perhaps
you could point me in the direction of where I can locate them? Enclosed is my
list and I will keep an eye out for manuals you need. Thanks.
?
Respectfully, Robert
?
p.s. Below is my list of H.P. oscilliscopes;
?
OS-121A/USM-140
OS-82A/USM-105
OS-121C/USM-140
OS-121D/USM-140
?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Thursday, May 13, 2004 10:07
PM
Subject: [hp_agilent_equipment]
Introduction
Greetings All,
I am a new member of the group and am
looking forward to an enjoyable
time here.
I have a large inventory
of HP boat anchors which I want to dispose of.
Some I want to sell as
functional units, others might get parted out if
there is any market for
these parts. There are over 60 units consisting
of these models: 130C,
140A, 1900A, 200CD, 214A, 302B, 342A, 400D, 400H,
411A, 415B, 428A, 431B,
5210A, 523C, 606A, 608C, 608D, 612A, 614A, 616A,
618B, 626A, 694A, 851B,
8690A, and probably a few others.
Any suggestions for disposing of this
would be appreciated. I also need
manuals for most models and there are
just too many to buy them. I think
that there are downloadable manuals for
the equivalent military units
but I don't know the military model numbers.
Is there a cross reference
list
available?
Thanks,
Jack
|
?
----- Original Message -----
Sent: Sunday, May 16, 2004 11:18 AM
Subject: Re: [hp_agilent_equipment]
Introduction
Hello Jack.
?
This is Robert.?I have a list of H.P.
Oscilliscopes I am looking for. Perhaps you might have a few of them or
perhaps you could point me in the direction of where I can locate them?
Enclosed is my list and I will keep an eye out for manuals you need.
Thanks.
?
Respectfully, Robert
?
p.s. Below is my list of H.P. oscilliscopes;
?
OS-121A/USM-140
OS-82A/USM-105
OS-121C/USM-140
OS-121D/USM-140
?
?
----- Original Message -----
Sent: Thursday, May 13, 2004 10:07
PM
Subject: [hp_agilent_equipment]
Introduction
Greetings All,
I am a new member of the group and
am looking forward to an enjoyable
time here.
I have a large
inventory of HP boat anchors which I want to dispose of.
Some I want to
sell as functional units, others might get parted out if
there is any
market for these parts. There are over 60 units consisting
of these
models: 130C, 140A, 1900A, 200CD, 214A, 302B, 342A, 400D, 400H,
411A,
415B, 428A, 431B, 5210A, 523C, 606A, 608C, 608D, 612A, 614A, 616A,
618B,
626A, 694A, 851B, 8690A, and probably a few others.
Any suggestions
for disposing of this would be appreciated. I also need
manuals for most
models and there are just too many to buy them. I think
that there are
downloadable manuals for the equivalent military units
but I don't know
the military model numbers. Is there a cross reference
list
available?
Thanks,
Jack
|
Hi Robert,
I have two HP scopes. One is a 130C, which I will probably keep, at least for now. The other is a 140A with 1405A and 1420A plug ins. I will sell the 140A but at this time I have no idea what condition it is in, either cosmetically or functionally. If you are interested in the 140A let me know and I will check it out and get back to you.
I also have an 851B Spectrum Analyzer Display, but I only have the display, not the rest of the unit. I will probably scrap the 851B for parts so if you need any knobs or other scope parts contained in the display unit I might be able to help you.
With best wishes,
Jack
===================================
JD Crone Associates, LLC
Computer Forensics - Data Recovery
5534 South Sixth Street #120
Klamath Falls, OR 97603
Voice: 626.441.8441
Fax: 626.441.6425
===================================
Robert Middleton wrote:
toggle quoted message
Show quoted text
Hello Jack.
This is Robert. I have a list of H.P. Oscilliscopes I am looking for. Perhaps you might have a few of them or perhaps you could point me in the direction of where I can locate them? Enclosed is my list and I will keep an eye out for manuals you need. Thanks.
Respectfully, Robert
p.s. Below is my list of H.P. oscilliscopes;
OS-121A/USM-140
OS-82A/USM-105
OS-121C/USM-140
OS-121D/USM-140
----- Original Message -----
*From:* Jack Crone <mailto:jcrone@...>
*To:* hp_agilent_equipment@...
<mailto:hp_agilent_equipment@...>
*Sent:* Thursday, May 13, 2004 10:07 PM
*Subject:* [hp_agilent_equipment] Introduction
Greetings All,
I am a new member of the group and am looking forward to an enjoyable
time here.
I have a large inventory of HP boat anchors which I want to dispose of.
Some I want to sell as functional units, others might get parted out if
there is any market for these parts. There are over 60 units consisting
of these models: 130C, 140A, 1900A, 200CD, 214A, 302B, 342A, 400D,
400H,
411A, 415B, 428A, 431B, 5210A, 523C, 606A, 608C, 608D, 612A, 614A,
616A,
618B, 626A, 694A, 851B, 8690A, and probably a few others.
Any suggestions for disposing of this would be appreciated. I also need
manuals for most models and there are just too many to buy them. I
think
that there are downloadable manuals for the equivalent military units
but I don't know the military model numbers. Is there a cross reference
list available?
Thanks,
Jack
*Yahoo! Groups Sponsor*
ADVERTISEMENT
<>
------------------------------------------------------------------------
*Yahoo! Groups Links*
* To visit your group on the web, go to:
* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <>.
|
Hello Hank and other people in the HP_agilent group! Crikey, "light-years from any recognized civilzation", where on earth does that put me then? Beyond the outer universe rim? I live in a town so small in Western Australia that even people from WA havn't heard of. I will post my actual intro message separately. Rod. --- In hp_agilent_equipment@..., "Henry Kolesnik" <kolesnik@s...> wrote: I'm in Tulsa, OK..
----- Original Message -----
From: Jack Crone
To: hp_agilent_equipment@...
Sent: Saturday, May 15, 2004 4:30 PM
Subject: [hp_agilent_equipment] Re: Introduction
Hank WD5JFR wrote:
> Jack
> Where are you located?
> tnx
I'm in Klamath Falls, Oregon. That is south-central Oregon, 20 miles from the California border and light-years from any recognized civilzation.
Jack
Yahoo! Groups Sponsor
ADVERTISEMENT
-------------------------------------------------------------------
----------- Yahoo! Groups Links
a.. To visit your group on the web, go to:
b.. To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
Sorry for the re-post. I had the wrong "Subject" line, the first time.
----------
From: Thomas P. Gootee[SMTP:tomg@...]
Sent: Monday, May 17, 2004 10:22 AM
To: 'hp_agilent_equipment@...'
Subject: RE: [hp_agilent_equipment] Digest Number 101
Jack,
I have the military model designation cross-references for most or all of the equipment on your list, which I will email to you.
Even better, I have spent a LOT of time ferreting-out any downloadable HP manuals that are available. I will send you a list of all of the URLs for manuals that I have found so far, for the equipment on your list, as soon as I can get time.
Some of these manuals are *extremely* difficult to find. Just knowing the military designations and the URLs for the military manuals sites does not even begin to get you there, in many cases.
Take a look at the list of manuals that I have already found, at . If some that you need aren't there, I will see if I can find them.
P.S. I also have a copy of the FedLog (Federal Logistics) Database, with which I can usually find commercial and military part number/model designation cross-references for a given military for commercial part number or model designation. And that's not just for *equipment* numbers. It also contains most *individual* part numbers! Often, for example, a semiconductor that is just marked with an HP part number can be identified completely, from the database, resulting in a list of commercial part numbers and manufacturers' names, and sometimes the technical specs of the device, etc. And the database seems to contain everything from mule harnesses and horse whips (and where to get them, hehe) to modern ICs and systems (up through about 2002 or so, anyway). So, if anyone would like me to attemp a part-number xref, email me.
By the way: I have an HP 608D, too (and all THREE of the military PDF manuals for it). It's a big, gorgeous 0.5 MHz to 510 MHz signal generator (or, in some cases, apparently, 10 MHz to 410 Mhz). Mine was still almost perfectly calibrated, when I got it! (It's for SALE, too...). That one (the HP 608D) is also known as the AN/USM-44A, with the primary unit also known as the TS-510A/U.
Regards,
Tom Gootee (tomg AT fullnet.com)
----- Original Message -----
From: Jack Crone
To: hp_agilent_equipment@...
Sent: Thursday, May 13, 2004 10:07 PM
Subject: [hp_agilent_equipment] Introduction
Greetings All,
I am a new member of the group and am looking forward to an enjoyable
time here.
I have a large inventory of HP boat anchors which I want to dispose of.
Some I want to sell as functional units, others might get parted out if
there is any market for these parts. There are over 60 units consisting
of these models: 130C, 140A, 1900A, 200CD, 214A, 302B, 342A, 400D, 400H,
411A, 415B, 428A, 431B, 5210A, 523C, 606A, 608C, 608D, 612A, 614A, 616A,
618B, 626A, 694A, 851B, 8690A, and probably a few others.
Any suggestions for disposing of this would be appreciated. I also need
manuals for most models and there are just too many to buy them. I think
that there are downloadable manuals for the equivalent military units
but I don't know the military model numbers. Is there a cross reference
list available?
Thanks,
Jack
|
Hello Jack.
?
Thank you for getting back to me. I could be
interested in the 140A and also the 851B. Is there a possibility that you could
send some photos of both? When your time permits please let me
know.
?
Also, when you do happen to run accross any of the
military versions that I have mentioned in my e-mail, (heavy rascals!). Thanks
for your time and for your efforts and you and yours have a great
day.
?
Respectfully, Robert
?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Sunday, May 16, 2004 7:56 PM
Subject: Re: [hp_agilent_equipment]
Introduction
Hi Robert,
I have two HP scopes. One is a 130C,
which I will probably keep, at
least for now. The other is a 140A with
1405A and 1420A plug ins. I will
sell the 140A but at this time I have no
idea what condition it is in,
either cosmetically or functionally. If you
are interested in the 140A
let me know and I will check it out and get
back to you.
I also have an 851B Spectrum Analyzer Display, but I only
have the
display, not the rest of the unit. I will probably scrap the 851B
for
parts so if you need any knobs or other scope parts contained in the
display unit I might be able to help you.
With best
wishes,
Jack
===================================
JD Crone
Associates, LLC
Computer Forensics - Data Recovery
5534 South Sixth
Street #120
Klamath Falls, OR 97603
Voice: 626.441.8441
Fax:
626.441.6425
===================================
Robert
Middleton wrote:
> Hello Jack.
>?
> This is Robert. I
have a list of H.P. Oscilliscopes I am looking for.
> Perhaps you might
have a few of them or perhaps you could point me in
> the direction of
where I can locate them? Enclosed is my list and I will
> keep an eye
out for manuals you need. Thanks.
>?
> Respectfully,
Robert
>?
> p.s. Below is my list of H.P.
oscilliscopes;
>?
> OS-121A/USM-140
>
OS-82A/USM-105
> OS-121C/USM-140
> OS-121D/USM-140
>?
>?
>
>???? ----- Original
Message -----
>???? *From:* Jack Crone
>???? *To:*
hp_agilent_equipment@...
>????
>????
*Sent:* Thursday, May 13, 2004 10:07 PM
>????
*Subject:* [hp_agilent_equipment] Introduction
>
>???? Greetings All,
>
>???? I am a new member of the group and am looking
forward to an enjoyable
>???? time here.
>
>???? I have a large inventory of HP boat anchors
which I want to dispose of.
>???? Some I want to
sell as functional units, others might get parted out
if
>???? there is any market for these parts. There
are over 60 units consisting
>???? of these models:
130C, 140A, 1900A, 200CD, 214A, 302B, 342A,
400D,
>???? 400H,
>????
411A, 415B, 428A, 431B, 5210A, 523C, 606A, 608C, 608D, 612A,
614A,
>???? 616A,
>????
618B, 626A, 694A, 851B, 8690A, and probably a few others.
>
>???? Any suggestions for disposing of this would
be appreciated. I also need
>???? manuals for most
models and there are just too many to buy them.
I
>???? think
>???? that
there are downloadable manuals for the equivalent military
units
>???? but I don't know the military model
numbers. Is there a cross reference
>???? list
available?
>
>???? Thanks,
>
>???? Jack
>
>
>
>???? *Yahoo! Groups
Sponsor*
>????
ADVERTISEMENT
>???? <>
>
>
>????
------------------------------------------------------------------------
>????
*Yahoo! Groups Links*
>
>???????? * To visit your group
on the web, go
to:
>??????????
>???????????
>???????? * To unsubscribe from
this group, send an email
to:
>??????????
hp_agilent_equipment-unsubscribe@...
>??????????
>???????????
>???????? * Your use of Yahoo!
Groups is subject to the Yahoo! Terms
of
>?????????? Service
<>.
>
>
|
Hi Robert,
I will be glad to send you pictures. I have so many things going on right now that I do tend to get behind or forget. If you have not heard from me in a week, send me a reminder email.
Thanks,
Jack
Robert Middleton wrote:
toggle quoted message
Show quoted text
Hello Jack.
Thank you for getting back to me. I could be interested in the 140A and also the 851B. Is there a possibility that you could send some photos of both? When your time permits please let me know.
Also, when you do happen to run accross any of the military versions that I have mentioned in my e-mail, (heavy rascals!). Thanks for your time and for your efforts and you and yours have a great day.
Respectfully, Robert
----- Original Message -----
*From:* Jack Crone <mailto:jcrone@...>
*To:* hp_agilent_equipment@...
<mailto:hp_agilent_equipment@...>
*Sent:* Sunday, May 16, 2004 7:56 PM
*Subject:* Re: [hp_agilent_equipment] Introduction
Hi Robert,
I have two HP scopes. One is a 130C, which I will probably keep, at
least for now. The other is a 140A with 1405A and 1420A plug ins. I
will
sell the 140A but at this time I have no idea what condition it is in,
either cosmetically or functionally. If you are interested in the 140A
let me know and I will check it out and get back to you.
I also have an 851B Spectrum Analyzer Display, but I only have the
display, not the rest of the unit. I will probably scrap the 851B for
parts so if you need any knobs or other scope parts contained in the
display unit I might be able to help you.
With best wishes,
Jack
===================================
JD Crone Associates, LLC
Computer Forensics - Data Recovery
5534 South Sixth Street #120
Klamath Falls, OR 97603
Voice: 626.441.8441
Fax: 626.441.6425
===================================
Robert Middleton wrote:
> Hello Jack.
> This is Robert. I have a list of H.P. Oscilliscopes I am looking
for.
> Perhaps you might have a few of them or perhaps you could point
me in
> the direction of where I can locate them? Enclosed is my list and
I will
> keep an eye out for manuals you need. Thanks.
> Respectfully, Robert
> p.s. Below is my list of H.P. oscilliscopes;
> OS-121A/USM-140
> OS-82A/USM-105
> OS-121C/USM-140
> OS-121D/USM-140
>
> ----- Original Message -----
> *From:* Jack Crone <mailto:jcrone@...>
> *To:* hp_agilent_equipment@...
> <mailto:hp_agilent_equipment@...>
> *Sent:* Thursday, May 13, 2004 10:07 PM
> *Subject:* [hp_agilent_equipment] Introduction
>
> Greetings All,
>
> I am a new member of the group and am looking forward to an
enjoyable
> time here.
>
> I have a large inventory of HP boat anchors which I want to
dispose of.
> Some I want to sell as functional units, others might get
parted out if
> there is any market for these parts. There are over 60 units
consisting
> of these models: 130C, 140A, 1900A, 200CD, 214A, 302B, 342A,
400D,
> 400H,
> 411A, 415B, 428A, 431B, 5210A, 523C, 606A, 608C, 608D, 612A,
614A,
> 616A,
> 618B, 626A, 694A, 851B, 8690A, and probably a few others.
>
> Any suggestions for disposing of this would be appreciated. I
also need
> manuals for most models and there are just too many to buy
them. I
> think
> that there are downloadable manuals for the equivalent
military units
> but I don't know the military model numbers. Is there a cross
reference
> list available?
>
> Thanks,
>
> Jack
>
>
>
> *Yahoo! Groups Sponsor*
> ADVERTISEMENT
>
<>
>
>
>
------------------------------------------------------------------------
> *Yahoo! Groups Links*
>
> * To visit your group on the web, go to:
>
> * To unsubscribe from this group, send an email to:
> hp_agilent_equipment-unsubscribe@...
>
<mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <>.
>
>
*Yahoo! Groups Sponsor*
ADVERTISEMENT
<>
------------------------------------------------------------------------
*Yahoo! Groups Links*
* To visit your group on the web, go to:
* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <>.
|
Hi Robert,
I got out the 140A and found it to not be worth fooling with. The top, bottom, and one side cover are missing along with both handles. It looks like it was being used for parts to repair other units. The plugins do seem ok, but I can't test them without the 140A. Both plugins are now on eBay, auctions 3817471981 and 3817472794. I'll give you a report on the 851B when I get to it.
Best wishes,
Jack
Robert Middleton wrote:
toggle quoted message
Show quoted text
Hello Jack.
Thank you for getting back to me. I could be interested in the 140A and also the 851B. Is there a possibility that you could send some photos of both? When your time permits please let me know.
Also, when you do happen to run accross any of the military versions that I have mentioned in my e-mail, (heavy rascals!). Thanks for your time and for your efforts and you and yours have a great day.
Respectfully, Robert
----- Original Message -----
*From:* Jack Crone <mailto:jcrone@...>
*To:* hp_agilent_equipment@...
<mailto:hp_agilent_equipment@...>
*Sent:* Sunday, May 16, 2004 7:56 PM
*Subject:* Re: [hp_agilent_equipment] Introduction
Hi Robert,
I have two HP scopes. One is a 130C, which I will probably keep, at
least for now. The other is a 140A with 1405A and 1420A plug ins. I
will
sell the 140A but at this time I have no idea what condition it is in,
either cosmetically or functionally. If you are interested in the 140A
let me know and I will check it out and get back to you.
I also have an 851B Spectrum Analyzer Display, but I only have the
display, not the rest of the unit. I will probably scrap the 851B for
parts so if you need any knobs or other scope parts contained in the
display unit I might be able to help you.
With best wishes,
Jack
===================================
JD Crone Associates, LLC
Computer Forensics - Data Recovery
5534 South Sixth Street #120
Klamath Falls, OR 97603
Voice: 626.441.8441
Fax: 626.441.6425
===================================
Robert Middleton wrote:
> Hello Jack.
> This is Robert. I have a list of H.P. Oscilliscopes I am looking
for.
> Perhaps you might have a few of them or perhaps you could point
me in
> the direction of where I can locate them? Enclosed is my list and
I will
> keep an eye out for manuals you need. Thanks.
> Respectfully, Robert
> p.s. Below is my list of H.P. oscilliscopes;
> OS-121A/USM-140
> OS-82A/USM-105
> OS-121C/USM-140
> OS-121D/USM-140
>
> ----- Original Message -----
> *From:* Jack Crone <mailto:jcrone@...>
> *To:* hp_agilent_equipment@...
> <mailto:hp_agilent_equipment@...>
> *Sent:* Thursday, May 13, 2004 10:07 PM
> *Subject:* [hp_agilent_equipment] Introduction
>
> Greetings All,
>
> I am a new member of the group and am looking forward to an
enjoyable
> time here.
>
> I have a large inventory of HP boat anchors which I want to
dispose of.
> Some I want to sell as functional units, others might get
parted out if
> there is any market for these parts. There are over 60 units
consisting
> of these models: 130C, 140A, 1900A, 200CD, 214A, 302B, 342A,
400D,
> 400H,
> 411A, 415B, 428A, 431B, 5210A, 523C, 606A, 608C, 608D, 612A,
614A,
> 616A,
> 618B, 626A, 694A, 851B, 8690A, and probably a few others.
>
> Any suggestions for disposing of this would be appreciated. I
also need
> manuals for most models and there are just too many to buy
them. I
> think
> that there are downloadable manuals for the equivalent
military units
> but I don't know the military model numbers. Is there a cross
reference
> list available?
>
> Thanks,
>
> Jack
>
>
>
> *Yahoo! Groups Sponsor*
> ADVERTISEMENT
>
<>
>
>
>
------------------------------------------------------------------------
> *Yahoo! Groups Links*
>
> * To visit your group on the web, go to:
>
> * To unsubscribe from this group, send an email to:
> hp_agilent_equipment-unsubscribe@...
>
<mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <>.
>
>
*Yahoo! Groups Sponsor*
ADVERTISEMENT
<>
------------------------------------------------------------------------
*Yahoo! Groups Links*
* To visit your group on the web, go to:
* To unsubscribe from this group, send an email to:
hp_agilent_equipment-unsubscribe@...
<mailto:hp_agilent_equipment-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <>.
|
Opps, sorry about that. I meant to reply privately and sent to the list instead. Looks like I have done that more than once. Aside from that, thanks to everyone who responded, on and off list, to my introduction. The comments and suggestions were helpful and are appreciated. Finally, I found a documentation source which I don't recall seeing mentioned before -- . I was about to purchase something but had a question. I sent an email, but received no response. Does anyone know anything about this outfit? Jack Jack Crone wrote: Hi Robert,
I got out the 140A and found it to not be worth fooling with. The top, bottom, and one side cover are missing along with both handles. It looks like it was being used for parts to repair other units. The plugins do seem ok, but I can't test them without the 140A. Both plugins are now on eBay, auctions 3817471981 and 3817472794. I'll give you a report on the 851B when I get to it. <snip>
|
