开云体育

HP P/N 1251-0135 Card Edge Connector, 15 Pin, 1 Row

WReeve All Messages By This Member #141200 Looking for a p/n 1251-0135 card edge connector in new or serviceable condition. Please contact me off-list if available: whitreeve@... Thanks -- Whitham D. Reeve Anchorage, Alaska USA ---
Michael A. Terrell All Messages By This Member #141202 HP P/N 1251-0135 NSN 5935-00-972-9464 90-6015-1207-00 95354 METHODE ELECTRONICS INC. DBA NETWORK BUSS PRODUCTS 90-6015-1500-00 95354 METHODE ELECTRONICS INC. DBA NETWORK BUSS PRODUCTS 91-6915-1500-00 95354 METHODE ELECTRONICS INC. DBA NETWORK BUSS PRODUCTS SD615UR 95334 MILLER LABORATORIES Part Alternates: SD615UR, 11065572015, 11065572-015, 12510135, 1251-0135, 906015120700, 90-6015-1207-00, 906015150000, 90-6015-1500-00, 916915150000, 91-6915-1500-00, 5935-00-972-9464, 00-972-9464, 5935009729464, 009729464 SD615UR 95354 METHODE ELECTRONICS INC. DBA NETWORK BUSS PRODUCTS toggle quoted message Show quoted text On Thu, Jan 4, 2024 at 8:56?PM WReeve <whitreeve@...> wrote: Looking for a p/n 1251-0135 card edge connector in new or serviceable condition. Please contact me off-list if available: whitreeve@... Thanks -- Whitham D. Reeve Anchorage, Alaska USA ---
WReeve All Messages By This Member #141237 Could you explain what your post is about? Thanks! -- Whitham D. Reeve Anchorage, Alaska USA ---
Michael A. Terrell All Messages By This Member #141238 It is from the NSN used by the military. They provide information for spare parts. It tells who made it, and alternate part numbers. It would help, if you gave a model number, since it a 50 year old part. Description: Part Number: 1251-0135 Part Description: Mod and Ser Nbr Reqd Connector-PC Edge 30-CONT 0.156-in Tuning Fork 0.063-in 1-ROW Item Status: Obsolete Item Type: Keysight Qualified Part No models listed, and not available from Keysight. I see a reference to the HP 333/334 distortion analyzers and several Army TMs but I'm not going to use a good chunk of my monthly data to download all of them.
factory All Messages By This Member #141243 It's the PCB connector used in the 5245L in most positions (except the rectifier board), single row of 15 fork shaped contacts, single row of 15 open loop shaped tabs on the back for soldering wires & components, two mounting holes built in for chassis mounting, 0.156" (3.96mm) pitch. See pictures attached, I can't read any part numbers from the topside, can't turn it upside down as I'm working on this at the moment with lots of parts removed to access the decimal point board. David DSC_2308b.jpg DSC_2593a.jpg DSC_2594a.jpg
Michael A. Terrell All Messages By This Member #141245 The 05245-9044 manual has the part numbers in section IV. Many boards in that model are used in other counters of that era.? I have several, but they are buried in my shop where I can't reach them due to health issues. The 5248 is quite similar,
Robert G8RPI All Messages By This Member #141246 An EDAC 356-015-500-102 Should do the job. Just check the mounting hole dimensions. https://files.edac.net/edac/content/series/og/English/EDAC%20306%20316%20356%20Series%20Card%20Edge%20Connectors%20English%20Ordering%20Guide.pdf Available from Mouser, digikey etc for around $15 Robert G8RPI.

Previous Topic Next Topic