开云体育

hp 35670A option 1D2 swept sine

Mark Fort All Messages By This Member #116403 I think that this has been asked before, however I am not aware of a definitive answer. My question is were or how can I obtain the 1D2 option for the 35670A? This appears to be a software upgrade (via floppy disk) but I have seen references to ROM upgrades. I am confused. My thanks for any assistance with this. Mark
Mark Fort All Messages By This Member #116455 I have not had any luck with finding this upgrade through Keysight here in Australia. Mark
nj902 All Messages By This Member #116468 The swept sine is very nice to have.? I paid them $1500 for the option upgrade. As with the 35665A, when you ordered an option upgrade, they sent you a disk with the code to enable it on your serial number. The analyzer's serial number and firmware options are stored in EEPROM (U27) If you can find a suitable 'donor' image, you can replace or reprogram your EEPROM to add all the options.
Mark Fort All Messages By This Member #116478 开云体育 Thanks, Yes I have slowly come to the realisation that all this is stored in U27 on A7. This is I believe a 24Co1 EEPROM. Thanks for the help. ? Mark ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of nj902 via groups.io Sent: Friday, 11 June 2021 3:08 AM To: [email protected] Subject: Re: [HP-Agilent-Keysight-equipment] hp 35670A option 1D2 swept sine ? The swept sine is very nice to have.? I paid them $1500 for the option upgrade. As with the 35665A, when you ordered an option upgrade, they sent you a disk with the code to enable it on your serial number. The analyzer's serial number and firmware options are stored in EEPROM (U27) If you can find a suitable 'donor' image, you can replace or reprogram your EEPROM to add all the options.

Previous Topic Next Topic