I have been trying to rebuild a 16500C for a while now.. could use a mainboard and perhaps a new frame/case/chassis.. the one I have is damaged.? The PSU also has some issues too.? But I will take any 16500C parts that anyone has.. especially the motherboard/mainboard.
Thanks,
Greg Bowne
?>>> The information contained in this e-mail transmission is privileged and/or confidential intended solely for the exclusive use of the individual addressee. If you are not the intended addressee you are hereby notified that any retention, disclosure or other use is strictly prohibited. If you have received this notification in error, please immediately contact the sender and delete the material.
________________________________
From: John Griessen <john@...>
To: hp_agilent_equipment@...
Sent: Saturday, September 19, 2009 12:03:46 PM
Subject: [hp_agilent_equipment] HP 16500A,B,C parts, 16515/16A pair
?
I figured how to swap a good monitor from a 16500A to a 16500C
after taking apart the A. No more dim view!
16500 Frame parts, odd screws, covers, strap, mainboard,
touchscreen bezel/front panel assy, 3 or 4 of those projecting back side protector feet,
power supply, card cage halves, floppy drives, blank filler card, fans --
are available cheap, (for a few days at least), via USPS from 78756 Austin TX.
All the frame parts interchange between A,B,C. Not sure about the power supply --
different part number even though looks same.
No bottom feet or boot discs though.
Extra plugin modules:
16515/16A 1000MHz state/timing plugin pair with 32 coax probes $75
16510A LA 25MHz-state/ 100MHz-timing with probe leads but can't spare any probe ends $10
John Griessen
[Non-text portions of this message have been removed]
